GB 4400-1984
Replaced
GB 20031-2024
Active
National standards
force_standard
GB 20031-2024 Foam fire extinguishing equipment
GB 20031-2024 Foam fire extinguishing equipment
Basic Information
Standard Code:
GB 20031-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
yes
CCS Name:
Fire-fighting techniques
ICS Name:
Fire prevention
Publish Date:
2024-11-28
Implement Date:
2025-06-01
Pages:
76 pages
Scope
This document defines the terms and definitions of foam fire-extinguishing equipment, specifies the model compilation, parameter series, requirements, inspection rules, packaging, transportation, and storage, and describes the corresponding test methods.
This document is applicable to foam proportioning mixing devices, foam generating devices, foam spraying devices, unit-type foam fire-extinguishing devices, and related ancillary devices, etc.
This document is not applicable to foam spray fire-extinguishing devices.
Development Information
Replace the following standards
Referenced Standards
GB/T 150.1-2011 Pressure vessels—Part 1:General requirements
GB/T 150.1-2024 Pressure vessels—Part 1:General requirements
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.2-2000 Mechanical properties of fasteners—Nuts—Coarse thread
GB/T 3098.2-2015 Mechanical properties of fasteners—Nuts
GB/T 3098.2-2025 Mechanical properties of fasteners—Part 2:Nuts
GB/T 3098.3-2000 Mechanical properties of fasteners—Setscrews
GB/T 3098.3-2016 Mechanical properties of fasteners—Set screws
GB 3445-1993 Indoor fire hydrant
GB 3445-2005 Indoor fire hydrant
GB 3445-2018 Indoor fire hydrant
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 5135.1-2019 Automatic sprinkler system—Part 1:Sprinklers
GB 5135.3-2003 Automatic sprinkler system—Part 3:Water mist nozzles
GB 5135.3-2025 Automatic sprinkler system—Part 3:Water spray nozzle
GB 5135.6-2003 Automatic sprinkler system—Part 6:Convention valve
GB 5135.6-2018 Automatic sprinkler system—Part 6:Conventional valves
GB 5135.11-2006 Automatic sprinkler system—Part 11:Grooved couplings and fittings
GB 5135.11-2025 Automatic sprinkler systems—Part 11:Grooved pipe couplings and fittings
GB 6245-1998 Performance requirements and test methods for fire pumps
GB 6245-2006 Fire pumps
GB 6246-2001 Lined fire hose—Performance requirements and test methods
GB 6246-2011 Fire hose
GB 6246-2026 Fire hose
GB 8109-2023 Wheeled fire extinguishers
GB/T 9124.1-2019 Steel pipe flanges—Part 1:PN designated
GB/T 9124.2-2019 Steel pipe flanges—Part 2:Class designated
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB 12514-1990 Performance requirements and test methods for fire coupling
GB 12514-2026 Technical specifications for fire couplings
GB 12514.1-2005 Fire coupling—Part 1:General technical conditions for fire coupling
GB 12514.2-2006 Fire coupling—Part 2:Patterns and basic parameters for fire snap-types coupling
GB 12514.3-2006 Fire coupling—Part 3:Patterns and basic parameters for fire insertion-type coupling
GB 12514.4-2006 Fire coupling—Part 4:Patterns and basic parameters for fire screw-type coupling
GB/T 14561-2019 Fire hydrant cabinet
GB 15090-1994 Fire hose reel
GB 15090-2005 Fire hose reel
GB 15090-2026 Fire hose reel
GB 15308-1994 General specification for foam extinguishing agents
GB 15308-2006 Foam extinguishing agent
GB 15308-2025 Foam extinguishing agent
GB 19156-2003 General specifications for fire monitors
GB 19156-2019 Fire monitor
GB 19157-2003 General specification for remote—Controlled fire monitor systems
GB 25202-2010 Foam nozzle
GB/T 25205-2010 Deluge sprinkler
XF 61-2010 General technical requirements for fixed fire-extinguishing system drive and control devices
XF 834-2009 Foam Spray Fire Extinguisher Device
Related Standards
GB 4453-1984
Replaced
GB 4453-1984 Hydrant connector
GB 5908-1986
Replaced
GB 5908-1986 The quenching ability of flame arresters and its test method for petroleum tanks
GB 12791-1991
Replaced
GB 12791-1991 Performance requirements and test methods for point ultraviolet flame detectors
GB 12955-1991
Replaced
GB 12955-1991 General technical conditions for steel fire door
GB 13347-1992
Replaced