GB/T 3002-1982
Replaced
GB/T 3995-2014
Active
National standards
GB/T 3995-2014 Insulating high alumina refractory bricks
GB/T 3995-2014 Insulating high alumina refractory bricks
Basic Information
Standard Code:
GB/T 3995-2014
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Preformed heat-insulating and fire-resistant materials
ICS Name:
Fire-resistant materials
Publish Date:
2014-07-24
Implement Date:
2015-02-01
Pages:
6 pages
Scope
This standard specifies the classification, shape and dimensions, technical requirements, test methods, quality assessment procedures, packaging, marking, transportation, storage, and quality certificates of high-aluminum insulating refractory bricks.
This standard applies to high-aluminum insulating refractory bricks used in the insulation layer of thermal furnaces or in the working layer that directly contacts high-temperature molten materials.
Development Information
Replace the following standards
Referenced Standards
GB/T 2992.1-2011 Dimensions of refractory bricks— Part 1:Specification for general bricks
GB/T 2998-2001 Shaped insulating refractory products—Determination of bulk density and true porosity
GB/T 2998-2015 Test method for bulk density and true porosity of shaped insulating refractory products
GB/T 5072-2008 Refractories—Determination of cold compressive strength
GB/T 5072-2023 Refractory products—Determination of cold compressive strength
GB/T 5072.1-1998 Dense, shaped refractory products—Determination of cold compressive strength—Part 1:Referee test without packing
GB/T 5072.2-2004 Dense shaped refractory products—Determination of cold compressive strength—Part 2:Test with packing
GB/T 5988-2004 Dense shaped refractory products—Determination of permanent changs in dimension on heating
GB/T 5988-2007 Refractory products—Determination of permanent change in dimension on heating
GB/T 5988-2022 Refractory products—Determination of permanent change in dimensions on heating
GB/T 6900-2006 Chemical analysis of alumina-silica refractories
GB/T 6900-2016 Chemical analysis of alumina-silica refractories
GB/T 6900.1-1986 Fireclay and high-alumina refractories—Determination of loss content on ignition—Gravimetric method
GB/T 6900.2-1986 Fireclay and high-alumina refractories—Determination of silicon dioxide content—Gravimetric-molybdenum blue photometric method
GB/T 6900.3-1986 Fireclay and high-alumina refractories—Determination of iron oxide content—o-Phenanthroline photometric method
GB/T 6900.4-1986 Fireclay and high-alumina refractories—Determination of aluminium oxide content—EDTA volumetric method
GB/T 6900.5-1986 Fireclay and high-alumina refractories—Determination of titanium dioxide content—Hydrogen peroxide photometric method
GB/T 6900.6-1986 Fireclay and high-alumina refractories—Determination of calcium oxide content—EDTA volumetric method
GB/T 6900.7-1986 Fireclay and high-alumina refractories—Determination of magnesium oxide content—Xylidyl blue Ⅰ-CTAB photometric method
GB/T 6900.8-1986 Fireclay and high-alumina refractories—Determination of calcium oxide and magnesium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.9-1986 Fireclay and high-alumina refractories—Determination of potassium oxide and sodium oxide content—Atomic absorption spectrophotometric method
GB/T 6900.10-1986 Fireclay and high-alumina refractories—Determination of manganese oxide content—Ammonium persulfate photometric method
GB/T 6900.11-1986 Fireclay and high-alumina refractories—Determination of phosphorous pentoxide content—Molybdenum blue photometric method
GB/T 7321-2004 Sample preparation for testing of shaped refractory products
GB/T 7321-2017 Sample preparation for testing of shaped refractory products
GB/T 10325-2001 Shaped refractory products—Sampling and acceptance testing
GB/T 10325-2012 Shaped refractory products—Rule of acceptance,sampling and inspection
GB/T 10326-2001 Refractory products—Inspections of dimension appearance and section
GB/T 10326-2016 Shaped refractory products inspections of dimension, appearance and section
GB/T 16546-1996 Shaped refractory products—Packing, marking, transportation and storage
GB/T 16546-2020 General rules for packing,marking,transport,storage and quality certificates of shaped refractory
GB/T 16763-1997 Shaped insulating refractory products-classification
GB/T 16763-2012 Shaped insulating refractory products—Classification
GB/T 16763-2023 Classification of shaped insulating refractory products
GB/T 21114-2007 Chemical analysis of refractory products by XRF—Fused cast bead method
GB/T 21114-2019 Refractories—Chemical analysis by X-ray fluorescence(XRF)—Fused cast-bead method
YB/T 4130-2005 Refractory materials-Determination of thermal conductivity (Calorimeter)
GB/T 6900-2025 Chemical analysis of alumino-silicate refractories
YB/T 4130-2026 Abrasion-resistant Materials Thermal Conductivity Test Method (Water Flow Plate Method)
Related Standards
GB/T 3994-1983
Replaced
GB/T 3994-1983 Shaped insulating refractory products—Fireclay bricks
GB/T 3995-1983
Replaced
GB/T 3995-1983 Shaped insulating refractory products—High alumina bricks
GB/T 3996-1983
Abolished
GB/T 3996-1983 Shaped thermal insulating products—Diatomite bricks and shapes
GB/T 4984-1985
Replaced
GB/T 4984-1985 Chemical analysis methods of zirconia-alumina refractories
GB/T 6900.9-1986
Replaced