GB 6738-1986
Abolished
GB/T 17215.701-2011
Replaced
National standards
GB/T 17215.701-2011 Reference meter for electrical energy
GB/T 17215.701-2011 Reference meter for electrical energy
Basic Information
Standard Code:
GB/T 17215.701-2011
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nElectricity measurement and load control system
ICS Name:
The measurement of electrical and magnetic quantities
Publish Date:
2011-07-29
Implement Date:
2011-12-01
Pages:
32 pages
Scope
This section specifies the terms and definitions of standard electric energy meters, product classification, usage conditions, technical requirements, test methods, inspection rules, marking, packaging, and storage, etc.
This section applies to standard electric energy meters (hereinafter referred to as meters) with a reference frequency of 50 Hz (or 60 Hz), which are used in laboratories for testing and calibrating active and/or reactive electric energy meters.
Development Information
Same series standard
Superseded by the following standards
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 9254-2008 Information technology equipment—Radio disturbance characteristics—Limits and methods of measurement
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB/T 11150-2001 Testing equipment for electrical energy meters
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 17215.211-2006 Electricity metering equipment(a.c.)—General requirements,tests and test conditions—Part 11:Metering equipment
GB/T 17215.321-2008 Electricity metering equipment(a.c.)—Particular requirements—Part 21:Static meters for active energy(classes 1 and 2)
GB/T 17215.352-2009 Electricity metering equipment(AC)—Particular requirements—Part 52:Symbols
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
Related Standards
GB/T 9393-1988
Replaced
GB/T 9393-1988 STZ3 type connector for electronic measurement instrument
GB/T 12114-1989
Replaced
GB/T 12114-1989 Generic specification of high frequency signal generators
GB/T 12115-1989
Replaced
GB/T 12115-1989 Measuring methods for high frequency signal generators
GB/T 12116-1989
Replaced
GB/T 12116-1989 Generic specification for electronic analog voltmeters
GB/T 12117-1989
Replaced