GB/T 32483.1-2025 Active National standards

GB/T 32483.1-2025 Energy performance of controlgear for electric light sources—Part 1:Controlgear for fluorescent lamps—Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

Publish Date: 2025-10-31 Implement Date: 2026-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 32483.1-2025

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Lighting fixtures and accessories

ICS Name: Other standards related to lighting

Publish Date: 2025-10-31

Implement Date: 2026-02-01

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国照明电器标准化技术委员会(SAC/TC 224)

Pages: 24 pages

Scope

本文件描述了控制装置-灯线路与相应荧光灯配套工作时总输入功率的一种测量和计算方法，还描述了光源控制装置效率的计算方法。
本文件适用于1 000 V及以下直流电源和/或1 000 V及以下50 Hz交流电源的仅由控制装置和灯组成的控制装置-灯线路。
注：不包括在生产过程中对单个控制装置进行测试的要求。
本文件规定了用于家庭和一般商业用途，与下列荧光灯工作时的控制装置的总输入功率的测量方法和控制装置效率的计算方法：
——双端荧光灯（IEC 60081）；
——单端荧光灯（IEC 60901）；
——其他普通用途的低压汞荧光灯。
本文件不适用于：
——集成式灯的控制装置；
——可控式电磁控制装置。

Development Information

Drafting Units:

生迪光电科技股份有限公司、绍兴上虞菁华背光源有限公司、浙江汉蓝光电有限公司、国家电光源质量监督检验中心(北京)、北京电光源研究所有限公司、国家节能中心

Drafting Persons:

沈锦祥、杭军、吴永强、杨锋、张颖、冉然、张云鹏、杨碧玉

Word Count: 26 Thousand words Pages: 24 pages

Same series standard

GB/T 32483.2-2025 Energy performance of controlgear for electric light sources—Part 2:Controlgear for discharge lamps(excluding fluorescent lamps)—Method of measurement to determine the efficiency of controlgear GB/T 32483.3-2025 Energy performance of controlgear for electric light sources—Part 3:Controlgear for halogen lamps and LED modules—Method of measurement to determine the efficiency of the controlgear

Replace the following standards

GB/T 32483.1-2016 Energy performance of lamp controlgear—Part 1:Controlgear for fluorescent lamps—Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

Referenced Standards

GB/T 14044-2008 Ballasts for tubular fluorescent lamps—Performance requirements GB/T 15144-2020 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps—Performance requirements GB/T 39018-2020 Intelligent lighting equipment—Non-active mode power measurement IEC 60081:1997/AMD4:2010 IEC 60901:1996/AMD5:2011

Adopt standards

IEC 62442-1:2022

Related Standards

GB 19510.10-2004 Replaced

GB 19510.10-2004 Lamp control gear—Part 10:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps)

Publish Date: 2004-05-10

GB 19510.11-2004 Replaced

GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)

Publish Date: 2004-05-10

GB 19510.1-2004 Replaced

GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements

Publish Date: 2004-05-10

GB 19510.3-2004 Replaced

GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps

Publish Date: 2004-05-10

GB 19510.9-2004 Replaced

GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps

Publish Date: 2004-05-10

GB 19510.12-2005 Replaced

GB 19510.12-2005 Lamp controlgear—Part 12:Particular requirements for miscellaneous electronic circuits used with luminaries

Publish Date: 2005-01-18