GB/T 4478-1995
Replaced
DB31/T 613-2012
Active
Shanghai CityLocal standards
DB31/T 613-2012 Variable lane—General requirements for LED indication signs
DB31/T 613-2012 Variable lane—General requirements for LED indication signs
Price:
$ 89
Basic Information
Standard Code:
DB31/T 613-2012
Standard Type:
Local standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Highway engineering
ICS Name:
Road equipment and devices
Publish Date:
2012-08-03
Implement Date:
2012-12-01
Pages:
44 pages
Scope
This standard specifies the setting principles, requirements, construction and installation, and acceptance criteria for variable lane LED indicator signs.
This standard applies to sections or intersections of urban roads where variable lanes are set up, and can be used as a technical requirement for the setting up of variable lanes and the production of LED indicator signs, as well as a basis for quality control during project construction and acceptance. For variable lanes set up on highways and urban expressways, this standard can be used as a reference for implementation.
Development Information
Referenced Standards
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka:Salt mist
GB/T 2423.17-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ka:Salt mist
GB/T 2423.17-2024 Environmental testing—Part 2:Test methods—Test Ka:Salt mist
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 5080.7-1986 Equipment reliability testing Compliance test plans for failure rate and mean time between failures assuming constant failure rate
GB 5768.2-2009 Road traffic signs and markings—Part 2:Road traffic signs
GB 5768.3-2009 Road traffic signs and markings—Part 3:Road traffic markings
GB/T 7922-2008 Method of measuring the color of light sources
GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
GB 14887-2011 Road traffic signal lamps
GB/T 16311-2009 Specification and test method for road traffic markings
GB/T 18226-2000 Specification for steel components anticorrosion of highway traffic engineering appurtenances
GB/T 18226-2015 Specification for steel component anticorrosion of highway engineering
GB/T 18833-2002 Retro-reflective sheeting for road traffic signs
GB/T 23828-2009 Light-emitting diode changeable message signs of expressway
GB/T 18226-2025 Specification for steel component anticorrosion of highway traffic engineering
Related Standards
GB/T 8511.1-1995
Replaced
GB/T 8511.1-1995 Self-propelled vibratory rollers
GB/T 8511.2-1995
Replaced
GB/T 8511.2-1995 Towed vibratory rollers
GB/T 8511.3-1995
Replaced
GB/T 8511.3-1995 Walk behind vibratory rollers
GB/T 16277-1996
Replaced
GB/T 16277-1996 Asphalt paver
GB/T 16278-1996
Replaced