GB/T 12918-2009 Replaced National standards

GB/T 12918-2009 Specification for oil discharge monitoring and control systems for oil tankers

GB/T 12918-2009 Specification for oil discharge monitoring and control systems for oil tankers

Publish Date: 2009-03-09 Implement Date: 2009-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 12918-2009

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: \nCabin auxiliary equipment

ICS Name: Pollution, pollution control, and protection

Publish Date: 2009-03-09

Implement Date: 2009-11-01

Pages: 15 pages

Scope

This standard specifies the requirements, test methods, and inspection rules for oil discharge monitoring systems (hereinafter referred to as monitoring systems) on oil tankers.
This standard applies to the design, manufacture, and acceptance of monitoring systems used on oil tankers with a gross tonnage of 150 tons or more.

Development Information

Word Count: 28 Thousand words Pages: 15 pages

Replace the following standards

GB/T 12918-1991 Specification for oil discharge monitoring and control systems for oil tankers

Superseded by the following standards

GB/T 12918-2023 Technical condition for oil discharge monitoring and control systems for oil tankers

Referenced Standards

ISO 8217:1996 IMO MEPC.108(49) IMO MEPC.117(52) ASTM D1250-80 GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal) GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 4795-1999 Oily water separating equipment for machinery space bilges of ships GB/T 4795-2009 15 ppm bilge separators GB/T 4795-2023 Marine bilge water treatment device

Adopt standards

国际海事组织(IMO)海上环境保护委员会MEPC.108(49)决议

Related Standards

GB/T 21795-2008 Active

GB/T 21795-2008 Chemicals—Simulation test—Aerobic sewage treatment—Biofilms

Publish Date: 2008-05-12

GB/T 21796-2008 Replaced

GB/T 21796-2008 Chemicals—Activated sludge,respiration inhibition test

Publish Date: 2008-05-12

GB/T 21800-2008 Active

GB/T 21800-2008 Chemicals—Bioconcentration—Flow-through fish test

Publish Date: 2008-05-12

GB/T 21801-2008 Active

GB/T 21801-2008 Chemicals—Ready biodegradability—Manometric respirometry test

Publish Date: 2008-05-12

GB/T 21802-2008 Active

GB/T 21802-2008 Chemicals—Ready biodegradability—Modified MITI test (Ⅰ)

Publish Date: 2008-05-12

GB/T 21803-2008 Active

GB/T 21803-2008 Chemicals—Ready biodegradability—DOC die-away test

Publish Date: 2008-05-12