GB/T 4213-1992
Replaced
GB/T 17213.7-2017
Active
National standards
GB/T 17213.7-2017 Industrial-process control valves—Part 7:Control valve data sheet
GB/T 17213.7-2017 Industrial-process control valves—Part 7:Control valve data sheet
Basic Information
Standard Code:
GB/T 17213.7-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Executor
ICS Name:
Pressure regulator
Publish Date:
2017-12-29
Implement Date:
2018-07-01
Pages:
16 pages
Scope
This part of GB/T 17213 lists a set of general requirements that are necessary for the procurement of control valves for the vast majority of process systems. However, this part does not list all possible applicable requirements for process systems. The arrangement format of the list in this part is designed according to standardized data presentation methods, which helps fillers correctly fill out specifications and provides a basis for using data processing devices. This part is accompanied by detailed instructions to ensure that abbreviations and consistent data filling can be fully understood.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 17213.1-2015 Industrial-process control valves—Part 1:Control valve terminology and general considerations
GB/T 17213.2-2017 Industrial-process control valves—Part 2-1:Flow capacity—Sizing equations for fluid flow under installed conditions
GB/T 17213.3-2005 Industrial-process control valves—Part 3-1:Dimensions—Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves
GB/T 17213.4-2015 Industrial-process control valves—Part 4:Inspection and routine testing
GB/T 17213.5-2008 Industrial-process control valves—Part 5:Marking
GB/T 17213.10-2015 Industrial-process control valves—Part 2-4:Flow capacity—Inherent flow characteristics and rangeability
GB/T 17213.11-2005 Industrial-process control valves—Part 3-2:Dimensions—Face to face dimensions for rotary control valves except butterfly valves
GB/T 17213.12-2005 Industrial-process control valves—Part 3-3:Dimensions—End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
GB/T 17213.15-2017 Industrial-process control valves—Part 8-3:Noise considerations—Control valve aerodynamic noise prediction method
GB/T 17213.16-2015 Industrial-process control valves—Part 8-4:Noise considerations—Prediction of noise generated by hydrodynamic flow
GB/T 17213.17-2010 Industrial-process control valves—Part 2-5:Flow capacity—Sizing equations for fluid flow through multistage control valves with interstage recovery
IEC 60534(所有部分)
GB/T 17213.8-2015 Industrial-process control valves—Part 8-1:Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves
Adopt standards
IEC 60534-7:2010
Related Standards
GB/T 17213.5-2008
Active
GB/T 17213.5-2008 Industrial-process control valves—Part 5:Marking
GB/T 17213.17-2010
Active
GB/T 17213.17-2010 Industrial-process control valves—Part 2-5:Flow capacity—Sizing equations for fluid flow through multistage control valves with interstage recovery
JG/T 383-2012
Active
JG/T 383-2012 Self-operating differential pressure control valve
GB/T 17213.10-2015
Active
GB/T 17213.10-2015 Industrial-process control valves—Part 2-4:Flow capacity—Inherent flow characteristics and rangeability
GB/T 17213.1-2015
Active