GB/T 18241.2-2000
Active
GB/T 31399-2015
Active
National standards
GB/T 31399-2015 Sinking rubber roller for cold rolled sheet
GB/T 31399-2015 Sinking rubber roller for cold rolled sheet
Basic Information
Standard Code:
GB/T 31399-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Other rubber products
ICS Name:
Other rubber and plastic products
Publish Date:
2015-05-15
Implement Date:
2015-10-01
Pages:
10 pages
Scope
This standard specifies the classification and marking, product structure, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of cold-rolled rubber immersion rollers used in the metallurgical industry (hereinafter referred to as rubber rollers). This standard applies to immersion-type rubber rollers used in various cold-rolled sheet production lines in the metallurgical industry (such as stainless steel, galvanized, tin-plated, and non-ferrous metals). Similar rubber rollers in other industries can be used as reference.
Development Information
Referenced Standards
GB/T 4459.5-1999 Mechanical drawings—Representation of centre holes
GB/T 9239.1-2006 Mechanical vibration—Balance quality requirements for rotors in a constant(rigid)state—Part 1:Specification and verification of balance tolerances
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1689-1998 Rubber vulcanized—Determination of abrasion resistance(Akron machine)
GB/T 1689-2014 Rubber vulcanized—Determination of abrasion resistance (Akron machine)
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 11211-1989 Rubber, vulcanized—Determination of adhesion to metal—Tension method
GB/T 11211-2009 Rubber,vulcanized or thermoplastic—Determination of adhesion to metal—Two-plate method
GB/T 15254-1994 Rubber, vulcanized—Determination of adhesion to metal—180°Peel test method
GB/T 15254-2014 Rubber,vulcanized—Determination of adhesion to metal—180° peel test method
HG/T 3078-2001 HG/T 3078-2001 Rubber and plastic roll surface characteristics
HG/T 3079-1999 The tolerance of the dimensions for rubber and plastic rollers
HG/T 2413.2-1992 The determination of apparent hardness of rubber roll using Shore hardness tester
Related Standards
GB/T 18241.3-2000
Replaced
GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine
GB 18241.1-2001
Replaced
GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment
GB/T 20029-2005
Active
GB/T 20029-2005 Rubber isolation bearings for instruments and equipments
GB/T 18241.4-2006
Active
GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization
GB 18173.1-2006
Replaced