MT/T 689.1-1997
Active
MT/T 552-2025
Active
Industry standards-Coal
MT/T 552-2025 Specification of face powered support and advanced powered support
MT/T 552-2025 Specification of face powered support and advanced powered support
Basic Information
Standard Code:
MT/T 552-2025
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Mine support equipment
ICS Name:
\nTunneling and laying pipeline equipment
Publish Date:
2025-06-30
Implement Date:
2025-12-30
Publisher:
国家能源局
Technical Committee:
煤炭行业煤矿专用设备标准化技术委员会
Pages:
16 pages
Scope
本文件规定了煤矿用端头和超前液压支架的要求、试验方法、检验规则、标志、包装、运输和贮存。
本文件适用于煤矿综采工作面或综放工作面主运巷道或回风巷道使用的端头液压支架（以下简称端头支架）和超前液压支架（以下简称“支架”）的设计和检验。
Development Information
Drafting Units:
中煤科工开采研究院有限公司、煤科(北京)检测技术有限公司、山东能源集团有限公司、中煤北京煤矿机械有限责任公司、平顶山平煤机煤矿机械装备有限公司
Drafting Persons:
王国法、马英、苏林军、李明忠、刘欣科、魏训涛、刘国柱、温杰、马端志、姚玉维、赵峰、包冬生、周玉乾、佟友、王跃功、刘剑
Replace the following standards
Referenced Standards
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB/T 12467.1-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 1:Guidelines for selection and use
GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials—Part 1:Criteria for the selection of the appropriate level of quality requirements
GB/T 12467.2-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 2:Comprehensive quality requirements
GB/T 12467.2-2009 Quality requirements for fusion welding of metallic materials—Part 2:Comprehensive quality requirements
GB/T 12467.3-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 3:Standards quality requirements
GB/T 12467.3-2009 Quality requirements for fusion welding of metallic materials—Part 3:Standard quality requirements
GB/T 12467.4-1998 Quality requirements for welding—Fusion welding of metallic materials—Part 4:Elementary quality requirements
GB/T 12467.4-2009 Quality requirements for fusion welding of metallic materials—Part 4:Elementary quality requirements
GB/T 12467.5-2009 Quality requirements for fusion welding of metallic materials—Part 5:Standard documents need to conform to claim conformity to the quality requirements
GB 25974.1-2010 Powered support for coal mine—Part 1:General specification
GB/T 25974.2-2010 Powered support for coal mine—Part 2:Specification for power set legs and rams
GB/T 25974.3-2010 Powered support for coal mine—Part 3:The hydraulic control system and valves
MT/T 98-2006 Testing specification for hydraulic support hoses and hose assemblies
MT/T 765-1997 General specification for the control valve of automatic spray on hydraulic supports
MT/T 986-2006 Mining U-shaped quick connector and accessories
Related Standards
MT/T 689.2-1997
Active
MT/T 689.2-1997 Plough—Specification of type inspection
GB/T 5621-1999
Replaced
GB/T 5621-1999 Test methods of performance for rock drilling machines and pneumatic tools
GB/T 13343-2008
Active
GB/T 13343-2008 Blast hole tricone rock bits
GB/T 5621-2008
Active
GB/T 5621-2008 Test methods of performance for rock drilling machines and pneumatic tools
GB 25518-2010
Active