GB 5590-1985
Replaced
GB/T 3836.2-2021
Active
National standards
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
Basic Information
Standard Code:
GB/T 3836.2-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Explosion-proof electrical appliances
ICS Name:
Electric equipment for use in explosive environments
Publish Date:
2021-10-11
Implement Date:
2022-05-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国防爆电气设备标准化技术委员会(SAC/TC 9)
Pages:
74 pages
Scope
本文件规定了由隔爆外壳“d”保护的爆炸性气体环境用电气设备结构和试验的专用要求。
本文件适用于拟在爆炸性气体环境中使用的采用隔爆外壳“d”保护的电气设备。
本文件是对GB/T 3836.1通用要求的补充和修改。当本文件的要求与GB/T 3836.1的要求有冲突时,本文件的要求优先。
Development Information
Drafting Units:
南阳防爆电气研究所有限公司、上海仪器仪表自控系统检验测试所有限公司、上海市质量监督检验技术研究院、煤科集团沈阳研究院有限公司、华荣科技股份有限公司、沈阳电气传动研究所(有限公司)、汉威科技集团股份有限公司、中煤科工集团重庆研究院有限公司、卧龙电气南阳防爆集团股份有限公司、海湾安全技术有限公司、北京三盈联合石油技术有限公司、安徽天康(集团)股份有限公司、新黎明科技股份有限公司、合隆防爆电气有限公司、飞策防爆电器股份有限公司、佳木斯电机股份有限公司、深圳市特安电子有限公司
Drafting Persons:
王军、张刚、杨德双、张丽晓、龚范昌、樊建强、石磊、李江、王巧立、李志刚、何显能、吴宣东、杨志强、季鹏、李传友、郑振晓、张胜余、徐跃弟、历锐、徐昌鸿、胡盈真
Same series standard
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e”
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure "p"
GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n”
GB/T 3836.9-2021 Explosive atmospheres—Part 9:Equipment protection by encapsulation “m”
GB/T 3836.13-2021 Explosive atmospheres—Part 13:Equipment repair,overhaul,reclamation and modification
GB/T 3836.28-2021 Explosive atmospheres—Part 28:Non-electrical equipment for explosive atmospheres—Basic method and requirements
GB/T 3836.29-2021 Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid immersion “k”
GB/T 3836.30-2021 Explosive atmospheres—Part 30:Equipment and components in explosive atmospheres in underground mines
GB/T 3836.31-2021 Explosive atmospheres—Part 31:Equipment dust ignition protection by enclosure “t”
GB/T 3836.32-2021 Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation
GB/T 3836.33-2021 Explosive atmospheres—Part 33:Equipment in adverse service conditions
GB/T 3836.34-2021 Explosive atmospheres—Part 34:Equipment assemblies
GB/T 3836.35-2021 Explosive atmospheres—Part 35:Classification of areas for explosive dust atmospheres
Replace the following standards
Referenced Standards
ANSI/ASME B1.20.1
GB/T 197-2003 General purpose metric screw threads—Tolerances
GB/T 197-2018 General purpose metric screw threads—Tolerances
GB/T 1406.2-2008 Types and dimentions of lamp caps—Part 2:Pin lamp caps
GB/T 2516-2003 General purpose metric screw threads—Limit deviations
GB/T 2516-2023 General purpose metric screw threads—Limit deviations
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.3-2000 Electrical apparatus for explosive gas atmospheres—Part 3:Increased safety “e”
GB 3836.3-2010 Explosive atmospheres—Part 3:Equipment protection by increased safety "e"
GB/T 3836.3-2021 Explosive atmospheres—Part 3:Equipment protection by increased safety “e”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB 3836.8-2003 Electrical apparatus for explosive gas atmospheres—Part 8:Type of protection “n”
GB 3836.8-2014 Explosive atmospheres—Part 8:Equipment protection by type of protection “n”
GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n”
GB/T 5163-2006 Sintered metal materials, excluding hardmetals—Permeable sintered metal materials—Determination of density, oil content, and open porosity
GB/T 5249-1985 Permeable sintered metal materials—Determination of bubble test pore size
GB/T 5249-2013 Permeable sintered metal materials—Determination of bubble test pore size
GB/T 5250-1993 Permeable sintered metal materials—Determination of fluid permeability
GB/T 5250-2014 Permeable sintered metal materials—Determination of fluid permeability
GB 9364.1-1997 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.2-1997 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.3-1997 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 9364.3-2018 Miniature fuses—Part 3:Sub-miniature fuse-links
GB 9364.4-2006 Miniature fuses—Part 4:Universal modular fuse-links (UMF)
GB/T 9364.4-2016 Miniature fuses—Part 4:Universal modular fuse-links (UMF)—Through-hole and surface mount types
GB/T 9364.5-2011 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links
GB/T 9364.6-2001 Miniature fuses—Part 6:Fuse-holders for miniature cartridge fuse-links
GB/T 9364.6-2023 Miniature fuses—Part 6:Fuse-holders for miniature fuse-links
GB/T 9364.7-2016 Miniature fuses—Part 7:Miniature fuse-links for special applications
GB/T 9364.8-2023 Miniature fuses—Part 8:Fuse resistors with particular overcurrent protection
GB/T 9364.10-2013 Miniature fuses—Part 10:User guide for miniature fuses
GB/T 9364.11-2016 Miniature fuses—Part 11:Fuse-links for LED lamps
GB 19148.2-2003 Types and dimensions of pin lampholders
GB/T 19148.2-2008 Types and dimensions of lampholders—Part 2:Pin lampholders
GB/T 9364.5-2025 Miniature fuses—Part 5:Guidelines for quality assessment of miniature fuse-links
Adopt standards
IEC 60079-1:2014
Related Standards
GB 3836.9-1990
Replaced
GB 3836.9-1990 Electrical apparatus for explosive atmospheres Encapsulated electrical apparatus "m"
GB 3836.11-1991
Replaced
GB 3836.11-1991 Electrical apparatus for explosive atmospheres-Method of test for ascertainment of maximum experimental safe gap
GB 3836.12-1991
Replaced
GB 3836.12-1991 Electrical apparatus for explosive atmospheres—Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
GB 3836.13-1997
Replaced
GB 3836.13-1997 Electrical apparatus for explosive gas atmospheres—Part 13:Repair and overhaul for apparatus used in explosive gas atmospheres
MT 703-1997
Replaced