GB 17646-1998
Replaced
GB/T 25387.2-2021
Active
National standards
GB/T 25387.2-2021 Wind turbines generator system—Full-power converter—Part 2:Test method
GB/T 25387.2-2021 Wind turbines generator system—Full-power converter—Part 2:Test method
Price:
$ 75
Basic Information
Standard Code:
GB/T 25387.2-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wind energy
ICS Name:
Wind power generation systems and other energy sources
Publish Date:
2021-03-09
Implement Date:
2021-10-01
Pages:
22 pages
Scope
This part of GB/T 25387 specifies the test conditions and test methods for full-power AC/DC voltage converters (hereinafter referred to as "converter") of wind power generation units (hereinafter referred to as "unit"). This part is applicable to the testing and inspection of full-power AC/DC voltage converters used in wind power generation units.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.56-2018 Environmental testing—Part 2:Test methods—Test Fh:Vibration, broadband random and guidance
GB/T 3859.1-2013 Semiconductor converters—General requirements and line commutated converters—Part 1-1:Specification of basic requirements
GB/T 12668.3-2012 Adjustable speed electrical power drive systems—Part 3:EMC requirements and specific test methods
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 36994-2018 Wind turbines—Test procedure of grid adaptability
GB/T 36995-2018 Wind turbines—Test procedure of voltage fault ride through capability
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 25387.1-2010 Full-power converter of wind turbine generator systems—Part 1:Technical condition
GB/T 25387.1-2021 Wind turbines generator system—Full-power converter—Part 1:Technical condition
Related Standards
GB 18451.1-2001
Replaced
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 2900.53-2001
Active
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 18709-2002
Active
GB/T 18709-2002 Methodology of wind energy resource measurement for wind farm
GB/T 18710-2002
Active
GB/T 18710-2002 Methodology of wind energy resource assessment for wind farm
GB/T 4750-2002
Replaced