GB/T 16934-1997
Replaced
GB/T 16895.23-2012
Replaced
National standards
GB/T 16895.23-2012 Low-voltage electrical installations—Part 6:Verification
GB/T 16895.23-2012 Low-voltage electrical installations—Part 6:Verification
Basic Information
Standard Code:
GB/T 16895.23-2012
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Building electrical appliances and fire-fighting equipment and devices
ICS Name:
The power supply system
Publish Date:
2012-06-29
Implement Date:
2012-11-01
Pages:
35 pages
Scope
This section stipulates the requirements for the initial inspection and regular inspection of electrical installations.
Chapter 61 outlines the procedures for inspecting and testing electrical installations to verify their compliance with the relevant requirements of other parts of GB 16895 as reasonably as possible, as well as the requirements for reporting the results of the initial inspection. An initial inspection should be conducted after the completion of the installation of a new device or the expansion or modification of an existing device.
Chapter 62 outlines the procedures for conducting periodic inspections of electrical installations to determine as accurately as possible whether the installation and all its supporting equipment meet the conditions of use, as well as the requirements for reporting the results of the periodic inspection.
Development Information
Same series standard
GB/T 16895.5-2012 Low-voltage electrical installations—Part 4-43:Protection for safety—Protection against overcurrent
GB/T 16895.13-2012 Low-voltage electrical installations—Part 7-701:Requirements for special installations or locations—Locations containing a bath or shower
GB/T 16895.27-2012 Low-voltage electrical installations—Part 7-705:Requirements for special installations or locations—Agricultural and horticultural premises
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 16895.2-2005 Electrical installations of buildings—Part 4-42:Protection for safety—Protection against thermal effects
GB/T 16895.3-2004 Electrical installations of buildings—Part 5-54:Selection and erection of electrical equipment-Earthing arrangements, protective conductors and protective bonding conductors
GB/T 16895.4-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 53:Switchgear and control gear
GB 16895.5-2000 Electrical installations of buildings—Part 4:Protection for safety—Chapter 43:Protection against over current
GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems
GB/T 16895.18-2010 Electrical installations of buildings—Part 5-51:Selection and erection of electrical equipment—Common rules
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB/T 18216.2-2002 Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c.—Equipment for testing, measuring or monitoring of protective measuring—Part 2:Insulation resistance
IEC 60364(所有部分)
IEC 61557(所有部分)
Adopt standards
IEC 60364-6:2006
Related Standards
GB 16895.5-2000
Replaced
GB 16895.5-2000 Electrical installations of buildings—Part 4:Protection for safety—Chapter 43:Protection against over current
GB 16895.6-2000
Replaced
GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems
GB 16895.7-2000
Replaced
GB 16895.7-2000 Electrical installations of buildings Part 7:Requirements for special installations or locations Section 704:Construction and demolition site installations
GB 16895.8-2000
Replaced
GB 16895.8-2000 Electrical installations of buildings—Part 7:Requirements for special installations or location—Section 706:Restrictive conducting locations
GB/T 16895.9-2000
Active