GB/T 16934-1997
Replaced
GB 16895.21-2004
Replaced
National standards
force_standard
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
GB 16895.21-2004 Electrical installations of buildings—Part 4-41:Protection for safety-Protection against electric shock
Basic Information
Standard Code:
GB 16895.21-2004
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
yes
CCS Name:
Building electrical appliances and fire-fighting equipment and devices
ICS Name:
The power supply system
Publish Date:
2004-05-14
Implement Date:
2005-02-01
Pages:
20 pages
Development Information
Same series standard
GB/T 16895.3-2004 Electrical installations of buildings—Part 5-54:Selection and erection of electrical equipment-Earthing arrangements, protective conductors and protective bonding conductors
GB/T 16895.22-2004 Electrical installations of buildings—Part 5-53:Selection and erection of electrical equipment—Isolation, switching and control—Section 534:Devices for protection against overvoltages
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 3805-1993 Extra-low voltage (ELV)—Limit values
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB 16895.3-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 54:Earthing arrangements and protective conductors
GB 16895.7-2000 Electrical installations of buildings Part 7:Requirements for special installations or locations Section 704:Construction and demolition site installations
GB/T 16895.18-2002 Electrical installations of buildings—Part 5:Selection and erection of electrical equipment Chapter 51:Common rules
GB 16916.1-1997
GB 16917.1-1997 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO) Part1:General rules
GB/T 17045-1997 Protection against electric shock—Common aspects for installation and equipment
GB/T 18379-2000
IEC 60146-2:1999
IEC 60364-6(所有部分)
IEC 60364-7(所有部分)
IEC 60364-7-705:1984
IEC导则104
GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules
GB 7251.2-1997 Low-voltage switchgear and control gear assemblies—Part 2:Particular requirements for busbar trunking systems(busways)
GB 7251.2-2006 Low-voltage switchgear and controlgear assemblies—Part 2:Particular requirements for busbar trunking systems (busways)
GB/T 7251.2-2023 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies
GB 7251.3-1997 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2006 Low-voltage switchgear and control gear assemblies—Part 3:Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use—Distribution boards
GB/T 7251.3-2017 Low-voltage switchgear and controlgear assemblies—Part 3:Distribution boardsintended to be operated by ordinary persons(DBO)
GB 7251.4-1998 Low-voltage switchgear and control gear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS)
GB/T 7251.4-2006 Low-voltage switchgear and control gear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS)
GB/T 7251.4-2017 Low-voltage switchgear and controlgear assemblies—Part 4:Particular requirements for assemblies for construction sites(ACS)
GB 7251.5-1998 Low-voltage switchgear and control gear assemblies—Part 5:Particular requirements for assemblies intended to be installed outdoors in public places—Cable distribution cabinets (CDCs)for power distribution in networks
GB/T 7251.5-2008 Low-voltage switchgear and controlgear assemblies—Part 5:Particular requirements for assemblies for power distribution in public networks
GB/T 7251.5-2017 Low-voltage switchgear and controlgear assemblies—Part 5:Assemblies for power distribution in public networks
GB/T 7251.6-2015 Low-voltage switchgear and controlgear assemblies—Part 6:Busbar trunking systems(busways)
GB/T 7251.7-2015 Low-voltage switchgear and controlgear assemblies—Part 7:Assemblies for specific applications such as marinas,camping sites,market squares,electric vehicles charging stations
GB/T 7251.8-2005 Low-voltage switchgear and controlgear assemblies—General technology requirement for intelligent assemblies
GB/T 7251.8-2020 Low-voltage switchgear and controlgear assemblies—Part 8:General technical requirements for intelligent assembly
GB/T 7251.10-2014 Low-voltage switchgear and controlgear assemblies—Part 10:Guidance to specifying assemblies
GB/T 7251.12-2013 Low-voltage switchgear and controlgear assemblies—Part 2:Power switchgear and controlgear assemblies
GB/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests
GB/Z 16935.2-2013 Insulation coordination for equipment within low-voltage systems—Part 2-1:Application guide—Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing
GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 16935.3-2016 Insulation coordination for equipment within low-voltage systems— Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 16935.4-2011 Insulation coordination for equipment within low-voltage systems—Part 4:Consideration of high-frequency voltage stress
GB/T 16935.5-2008 Insulation coordination for equipment within low-voltage systems—Part 5:Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
GB/Z 16935.6-2016 Insulation coordination for equipment within low-voltage systems—Part 2-2:Interface considerations—Application guide
GB/T 7251.7-2025 Low-voltage switchgear and controlgear assemblies—Part 7:Assemblies for specific applications such as marinas,camping sites,market squares,electric vehicle charging stations
GB/T 7251.10-2025 Low-voltage switchgear and controlgear assemblies—Part 10:Guidance to specifying assemblies
GB/T 16935.3-2025 Insulation coordination for equipment within low-voltage systems—Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 7251.5-2025 Low-voltage switchgear and controlgear assemblies—Part 5:Assemblies for power distribution in public networks
Adopt standards
IEC 60364-4-41:2001
Related Standards
GB 16895.5-2000
Replaced
GB 16895.5-2000 Electrical installations of buildings—Part 4:Protection for safety—Chapter 43:Protection against over current
GB 16895.6-2000
Replaced
GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems
GB 16895.7-2000
Replaced
GB 16895.7-2000 Electrical installations of buildings Part 7:Requirements for special installations or locations Section 704:Construction and demolition site installations
GB 16895.8-2000
Replaced
GB 16895.8-2000 Electrical installations of buildings—Part 7:Requirements for special installations or location—Section 706:Restrictive conducting locations
GB/T 16895.9-2000
Active