GB/T 3731-1983
Abolished
GB/T 17854-2018
Active
National standards
GB/T 17854-2018 Solid wire electrodes/flux combinations for submerged arc welding of stainless steels
GB/T 17854-2018 Solid wire electrodes/flux combinations for submerged arc welding of stainless steels
Basic Information
Standard Code:
GB/T 17854-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Welding and cutting
ICS Name:
Welding consumables
Publish Date:
2018-03-15
Implement Date:
2018-10-01
Pages:
10 pages
Scope
This standard specifies the classification, technical requirements, test methods, reinspection, and supply technical conditions of stainless steel welding wire-flux combinations for submerged arc welding.
This standard applies to the classification requirements of stainless steel welding wire-flux combinations for submerged arc welding, where the chromium content in the deposited metal is not less than 11%, and the nickel content is not more than 38%.
Development Information
Replace the following standards
Referenced Standards
GB/T 1954-1980 Determination of the weldign seam iron element contenting chromium, nickel austenitic stainless steel
GB/T 1954-2008 Methods of measurement for ferrite content in austenitic Cr-Ni stainless steel weld metals
GB/T 2652-1989 Method of tensile tests for weld and deposited metal
GB/T 2652-2008 Tensile test methods on weld and deposited metal
GB/T 2652-2022 Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints
GB/T 4334-2008 Corrosion of metals and alloys—Test methods for intergranular corrosion of stainless steels
GB/T 4334-2020 Corrosion of metals and alloys—Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
GB/T 4334.1-2000 Method of 10 per cent oxalic acid etch test for stainless steels
GB/T 4334.2-2000 Method of ferric sulfate-sulfuric acid test for stainless steels
GB/T 4334.3-2000 Method of 65 percent nitric acid test for stainless steels
GB/T 4334.4-2000 Method of nitric-hydrofluoric acid test for stainless steels
GB/T 4334.5-2000 Method of copper sulfate-sulfuric acid test for stainless steels
GB/T 4334.6-2000 Method of 5 per cent sulfuric acid test for stainless steels
GB/T 4334.6-2015 Test method for stainless steels in 5% sulfuric acid
GB/T 18591-2001 Welding—Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
GB/T 25774.1-2010 Test methods for welding consumables—Part 1:Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys
GB/T 25774.1-2023 Test methods for welding consumables—Part 1:Preparation of deposited metal test pieces and specimens for mechanical properties in steel,nickel and nickel alloys
GB/T 25775-2010 Technical delivery conditions for welding consumables—Type of product,dimensions,tolerances and markings
GB/T 25777-2010 Preparation methods of deposited metal specimens for chemical analysis
GB/T 25778-2010 Procurement guidelines for welding consumables
GB/T 29713-2013 Wire electrodes,strip electrodes,wires and rods for arc welding of stainless and heat resisting steels
Related Standards
GB/T 8454-1987
Replaced
GB/T 8454-1987 Determination of ferrous iron content in reduced ilmenite powder for welding rod
GB/T 11364-1989
Replaced
GB/T 11364-1989 Test method of spread-ability and clearance filling ability for filler metal
GB/T 13679-1992
Replaced
GB/T 13679-1992 Manganese base brazing filler metals
GB/T 13814-1992
Replaced
GB/T 13814-1992 Nickel and nickel alloy covered welding electrodes
GB/T 13815-1992
Replaced