GB/T 18241.2-2000
Active
GB/T 32105-2015
Active
National standards
GB/T 32105-2015 Dipped polyester cord fabric technical requirements and evaluation methods
GB/T 32105-2015 Dipped polyester cord fabric technical requirements and evaluation methods
Basic Information
Standard Code:
GB/T 32105-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Other rubber products
ICS Name:
Other rubber and plastic products
Publish Date:
2015-10-09
Implement Date:
2016-05-01
Pages:
19 pages
Scope
This standard specifies the product classification, technical requirements, evaluation methods, evaluation rules, as well as packaging, marking, storage, and transportation of impregnated polyester cord fabrics.
This standard is applicable to the technical evaluation and quality assessment of impregnated polyester cord fabrics used in rubber products such as tires and rubber hoses.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2942-1991 Rubber, vulcanized—Determination of static adhesion to textile cord—H-pull test
GB/T 2942-2009 Rubber,vulcanized—Determination of static adhension to textile cord—H-pull test
GB/T 3291.1-1997 Textiles—Terms of textiles material properties and test—Part 1:Fibre and yarn
GB/T 3291.2-1997 Textiles—Terms of textile material properties and test—Part 2:Fabric
GB/T 3291.3-1997 Textiles—Terms of textiles material properties and test—Part 3:General
GB/T 4666-1995 Textiles—Woven fabrics—Measurement of length of pieces
GB/T 4666-2009 Textiles—Fabrics—Determination of width and length
GB/T 6038-1993 Rubber test mixes—Preparation, mixing and vulcanization—Equipment and procedures
GB/T 6038-2006 Rubber test mixes—Preparation,mixing and vulcanization—Equipment and procedures
GB/T 6503-2001 Test method for moisture regain in synthetic filament yarns
GB/T 6503-2008 Testing method for moisture regain of man-made fibres
GB/T 6503-2017 Man-made fibres—Test method of moisture regain
GB 6529-1986 Standard atmospheres for textiles conditioning and testing
GB/T 6529-2008 Textiles—Standard atmospheres for conditioning and testing
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 12833-2006 Rubber and plastics—Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 30310-2013 Determination of dip solids pickup on yarns and cords of synthetic fiber
GB/T 30310-2022 Test methods of determination of dip pickup on dipped yarns and cords
GB/T 30312-2013 Test method for thermal shrinkage of yarns and cords
GB/T 30315-2013 Test method for reciprocating flex fatigue of dipped cords
GB/T 32110-2015 Terms and definition of dipped reinforcing materials
GB/T 32110-2025 Terms and definition of dipped reinforcing materials
GB/T 30310.1-2025 Determination of dip pickup on dipped cords and yarns—Part 1:Nuclear magnetic resonance method
GB/T 30312-2025 Test method for thermal shrinkage of dipped yarns and cords
Related Standards
GB/T 18241.3-2000
Replaced
GB/T 18241.3-2000 Rubber Iining—Part 3-Lining for floatation machine
GB 18241.1-2001
Replaced
GB 18241.1-2001 Rubber lining—Part 1 Anticorrosion lining for equipment
GB/T 20029-2005
Active
GB/T 20029-2005 Rubber isolation bearings for instruments and equipments
GB/T 18241.4-2006
Active
GB/T 18241.4-2006 Rubber lining—Part 4:Anticorrosion lining for flue gas desulfurization
GB 18173.1-2006
Replaced