GB/T 36089-2018 Active National standards

GB/T 36089-2018 Acrylonitrile-butadiene rubber(NBR)

GB/T 36089-2018 Acrylonitrile-butadiene rubber(NBR)

Publish Date: 2018-03-15 Implement Date: 2018-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 36089-2018
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Synthetic rubber
ICS Name: Rubber
Publish Date: 2018-03-15
Implement Date: 2018-10-01
Pages: 6 pages

Scope

This standard specifies the technical requirements, test methods, inspection rules, and packaging, marking, transportation, storage, and shelf life of acrylonitrile-butadiene rubber (NBR) [also known as nitrile rubber (NBR)].
This standard applies to nitrile rubber produced by low-temperature emulsion polymerization using butadiene and acrylonitrile as monomers, and is suitable for three types of nitrile rubber: medium-bonded acrylonitrile, medium-high bonded acrylonitrile, and high-bonded acrylonitrile.

Development Information

Word Count: 10 Thousand words Pages: 6 pages

Referenced Standards

GB/T 4498.1-2013 Rubber—Determination of ash—Part 1:Muffle furnace method GB/T 24131-2009 Rubber,raw—Determination of volatile matter content GB/T 34685-2017 Acrylonitrile-butadiene rubber(NBR)—Evaluation procedure GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness) GB/T 1232.1-2000 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity GB/T 1232.1-2016 Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 1:Determination of Mooney viscosity GB/T 9869-1997 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter GB/T 9869-2014 Rubber—Measurement of vulcanization characteristics with the oscillating disc curemeter GB/T 15340-1994 Rubber, raw, natural and synthetic Sampling and further preparative procedures GB/T 15340-2008 Rubber, raw natural and raw synthetic—Sampling and further preparative procedures GB/T 16584-1996 Rubber—Measurement of vulcanization characteristics with rotorless curemeters GB/T 19187-2003 Sampling procedures for inspection of raw synthetic rubber GB/T 19187-2016 Sampling procedures for inspection of raw synthetic rubber GB/T 19188-2003 Rubber, raw natural and raw synthetic—General guidance on storage GB/T 24797.3-2014 Film for wrapping rubber bales—Part 3:Ethylene-propylene-diene rubber(EPDM),acrylonitrilebutadiene rubber(NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber(AEM) and acrylic rubber(ACM) SH/T 1157.1-2012 Raw rubber Determination of acrylonitrile content in rubber (acrylonitrile-butadiene rubber (NBR)) Part 1: Ignition (Dumas) method SH/T 1157.2-2015 SH/T 1157.2-2015 Rubber - Determination of combined acrylonitrile content in butadiene-acrylonitrile rubber (NBR) - Part 2: Kjeldahl method SH/T 1159-2010 The Determination of Swelling Degree of Acrylonitrile-Butadiene Rubber (NBR) - SH/T 1159-2010 GB/T 15340-2025 Rubber,raw natural and raw synthetic—Sampling and further preparative procedures GB/T 9869.1-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 1:Introduction GB/T 9869.2-2025 Rubber—Measurement of vulcanization characteristics using curemeters—Part 2:Oscillating disc curemeter GB/T 9869.3-2025 Rubber—Measurement of vulcanization characteristics usingcuremeters—Part 3:Rotorless curemeter

Related Standards

Contact Us