GB/T 43897-2024 Cast superalloy—Master alloy—Single crystal

GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content GB/T 223.30-1994 Methods for chemical analysis of iron, steel and alloy The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method GB/T 223.47-1994 Methods for chemical analysis of iron, steel and alloy—The carrier precipitation-molybdenum blue potometric method for the determination of antimony content GB/T 223.53-1987 Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content GB/T 223.62-1988 Methods for chemical analysis of iron,steel and alloy—The butyl acetate extraction photometric method for the determination of phosphorus content GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method GB/T 223.70-1989 Methods for chemical analysis of iron, steel and alloy—The o-phenanthroline spectrophotometric method for the determination of iron content GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method GB/T 223.80-2007 Iron,steel and alloy—Determination of trace bismuth and arsenic contents—Hydride generation-atomic fluorescence spectrometric method GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 223.88-2019 Iron,steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method GB/T 223.89-2019 Iron,steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method GB/T 223.92-2023 Iron, steel and alloy—Determination of lanthanum, cerium, praseodymium, neodymium and samarium content—Inductively coupled plasma mass spectrometry GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 2039-1997 Metallic materials—Creep and stress-rupture test in tension GB/T 2039-2012 Metallic materials—Uniaxial creep testing method in tension GB/T 2039-2024 Metallic materials—Uniaxial creep testing method in tension GB/T 11261-1989 Methods for chemical analysis of high carbon chromium bearing steel The pulse heating inert gas fusion-infra red absorption method for the determination of oxygen content GB/T 11261-2006 Steel and iron—Determination of oxygen content—The pulse heating inert gas fusion-infra-red absorption method GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20124-2006 Steel and iron—Determination of nitrogen content—Thermal conductimetric method after fusion in a current of inert gas (Routine method) GB/T 20127.1-2006 Steel and alloy—Determination of trace element contents—Part 1:Determination of silver content by graphite furnace atomic absorption spectrometric method GB/T 20127.3-2006 Steel and alloy—Determination of trace element contents—Part 3:Determination of calcium, magnesium, barium content by inductively coupled plasma atomic emission spectrometric method GB/T 20127.3-2026 Steel and alloy—Determination of trace element contents—Part 3:Determination of scandium and barium content by inductively coupled plasma atomic emission spectrometric method GB/T 20127.5-2006 Steel and alloy—Determination of trace element contents—Part 5:Determination of gallium content by extraction separation-rhodamine B photometric method GB/T 20127.6-2006 Steel and alloy—Determination of trace element contents—Part 6:Determination of germanium content by gallic acid oscillopolarographic method GB/T 20127.7-2006 Steel and alloy—Determination of trace element contents—Part 7:Determination of lead content by oscillopolarographic method GB/T 20127.8-2006 Steel and alloy—Determination of trace element contents—Part 8:Determination of antimony content by hydride generation-atomic fluorescence spectrometric method GB/T 20127.10-2006 Steel and alloy—Determination of trace element contents—Part 10:Determination of selenium content by hydride generation-atomic fluorescence spectrometric method GB/T 20127.11-2006 Steel and alloy—Determination of trace element contents—Part 11:Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method GB/T 20127.12-2006 Steel and alloy—Determination of trace element contents—Part 12:Determination of zinc content by flame atomic absorption spectrometric method GB/T 20127.13-2006 Steel and alloy—Determination of trace element contents—Part 13:Determination of tin content by iodide extraction-phenylfluorone photometric method GB/T 31309-2014 Calculation of electoron vacancy number in nickel-base superalloys GB/T 31309-2020 Calculation of electron vacancy number in cast superalloys GB/T 32548-2016 Steel and iron—Determination of tin,antimony,cerium,lead and bismuth—Inductively coupled plasma mass spectrometric method GB/T 38939-2020 Nickel-based alloy—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(routine method) HB/Z 131 HB 5220.49-2008 Methods for chemical analysis of superalloys-Part 49:Determination of oxygen,nitrogen content by impulse heating-infrared,thermal conductivity method HB 5406 HB 20241.3 HB 20241.5 HB 20241.6 HB 20241.7 HB 20241.8 HB 20241.9