GB 19510.10-2004
Replaced
GB/T 24907-2010
Active
National standards
GB/T 24907-2010 LED lamps for road lighting—Performance specifications
GB/T 24907-2010 LED lamps for road lighting—Performance specifications
Basic Information
Standard Code:
GB/T 24907-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric light source products
ICS Name:
Other standards related to lighting
Publish Date:
2010-06-30
Implement Date:
2011-02-01
Pages:
10 pages
Scope
This standard specifies the terms and definitions, classification and naming, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of LED lamps for road lighting.
This standard applies to LED lamps for road lighting (hereinafter referred to as "lamps") that integrate LED devices, their control and drive circuits, and luminaries, and are powered by AC 220 V/50 Hz power supply.
Lamps that comply with this standard should be able to start and ignite normally within the range of 92% to 106% of the rated power supply voltage and -30 ℃ to 45 ℃.
Development Information
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 10682-2002 Double-capped fluorescent lamps—Performance specifications
GB/T 10682-2010 Double-capped fluorescent lamps—Performance specifications
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17743-1999 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2021 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 18595-2001 Equipment for general lighting purposes—EMC immunity requirements
GB/T 18595-2014 Equipment for general lighting purposes—EMC immunity requirements
GB 24819-2009 LED modules for general lighting—Safety specifications
GB/T 24819-2023 LED modules for general lighting—Safety specifications
GB/T 24823-2009 LED modules for general lighting—Performance requirements
GB/T 24823-2017 LED modules for general lighting—Performance requirements
GB/T 24824-2009 Measurement methods of LED modules for general lighting
GB/T 24823-2024 LED modules for general lighting—Performance specification
CJJ 45-2015 Standard for lighting design of urban road
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Related Standards
GB 19510.11-2004
Replaced
GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)
GB 19510.1-2004
Replaced
GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements
GB 19510.3-2004
Replaced
GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps
GB 19510.9-2004
Replaced
GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps
GB 19510.12-2005
Replaced