GB/T 21936-2008 Active National standards

GB/T 21936-2008 Earth-moving machinery—Machine-mounted retrieval device—Performance requirements

GB/T 21936-2008 Earth-moving machinery—Machine-mounted retrieval device—Performance requirements

Publish Date: 2008-06-03 Implement Date: 2009-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 21936-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2008-06-03

Implement Date: 2009-01-01

Pages: 4 pages

Scope

This standard specifies the performance requirements for towing devices installed on earthmoving machinery listed in GB/T 8498, as well as the requirements for verification tests. Wire ropes with a diameter of ≤40 mm can be used to tow a large earthmoving machine that has lost control or gotten stuck (this is typically the maximum size that a person can use to connect the towing rope to the machine by hand). This standard applies to towing devices installed on machines with a towing capacity of not more than 106 N. Their value should meet the minimum breaking strength of Group 3 wire ropes with a diameter of 40 mm and a steel core specified in GB/T 20118.

Development Information

Word Count: 5 Thousand words Pages: 4 pages

Referenced Standards

ISO 6750 ISO 7132 GB/T 7920.8-2003 Earth-moving machinery—Scrapers—Terminology and commercial specifications GB/T 7920.8-2018 Earth-moving machinery—Scrapers—Terminology and commercial specifications GB/T 8498-1999 Earth-moving machinery—Basic types—Vocabulary GB/T 8498-2008 Earth-moving machinery—Basic type—Identification and terms and definitions GB/T 8498-2017 Earth-moving machinery—Basic types—Identification and terms and definitions GB/T 20118-2006 Steel wire ropes for general purpose GB/T 20118-2017 Steel wire ropes for general purposes GB/T 21153-2007 Earth-moving machinery—Units for dimensions,performance and capacities,and their measurement accuracies GB/T 21154-2007 Earth-moving machinery—Methods of measuring the masses of whole machines,their equipment and components GB/T 21154-2014 Earth-moving machinery—Methods of measuring the masses of whole machines,their equipment and components GB/T 8498-2025 Earth-moving machinery—Basic types—Identification and vocabulary GB/T 20118-2025 General technical requirements for steel wire ropes

Adopt standards

ISO 10532:1995

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27