GB/T 25616-2010 Active National standards

GB/T 25616-2010 Earth-moving machinery—Auxiliary starting aid electrical connector

GB/T 25616-2010 Earth-moving machinery—Auxiliary starting aid electrical connector

Publish Date: 2010-12-01 Implement Date: 2011-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25616-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2010-12-01

Implement Date: 2011-03-01

Pages: 6 pages

Scope

This standard specifies the method for measuring the time-averaged A-weighted sound pressure level at the operator's position of earthmoving machinery during dynamic testing conditions.
This standard applies to earthmoving machinery as defined in GB/T 8498 and specified in Appendix A of GB/T 25614-2010 "Determination of Sound Power Levels of Earthmoving Machinery under Dynamic Testing Conditions".

Development Information

Word Count: 9 Thousand words Pages: 6 pages

Referenced Standards

GB/T 3956-2008 Conductors of insulated cables GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables GB/T 8498-1999 Earth-moving machinery—Basic types—Vocabulary GB/T 8498-2008 Earth-moving machinery—Basic type—Identification and terms and definitions GB/T 8498-2017 Earth-moving machinery—Basic types—Identification and terms and definitions GB 13539.1-2002 Low-voltage fuses—Part 1:General requirements GB 13539.1-2008 Low-voltage fuses—Part 1:General requirements GB/T 13539.1-2015 Low-voltage fuses—Part 1:General requirements GB/T 22353-2008 Earth-moving machinery—Electrical wires and cables—Principles of identification and marking GB/T 8498-2025 Earth-moving machinery—Basic types—Identification and vocabulary

Adopt standards

ISO 11862:1993

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27