MT/T 763-1997
Active
T/CADBM 41-2021
Active
Group standards
T/CADBM 41-2021 Motor for building shading product
T/CADBM 41-2021 Motor for building shading product
Basic Information
Standard Code:
T/CADBM 41-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Textile replicas
ICS Name:
Fabric
Publish Date:
2021-03-20
Implement Date:
2021-05-20
Pages:
12 pages
Scope
This document specifies the classification and marking, materials and components, requirements, test methods, inspection rules, labels, packaging, transportation, and storage of motors used in building shading products with a battery power supply of no more than 48 V and a single-phase AC power supply of no more than 250 V.
This document is applicable to rotary motors and linear motors used in building shading products.
Development Information
Referenced Standards
GB 755-2000 Rotating electrical machines—Rating and performance
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB/T 755-2019 Rotating electrical machines—Rating and performance
GB/T 755.2-2003 Methods for determining losses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5171.1-2014 Small power motors—Part 1:General technical requirements
GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture—Part 1:Untreated profiles
GB/T 5237.1-2008 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB/T 5237.1-2017 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB 5237.2-2004 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized colored profiles
GB/T 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized profiles
GB/T 5237.2-2017 Wrought aluminium alloy extruded profiles for architecture— Part 2:Anodized profiles
GB 5237.3-2004 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles
GB/T 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles
GB/T 5237.3-2017 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrodeposition coating profiles
GB 5237.4-2004 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 5237.4-2017 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles
GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12350-2009 Safety requirements of small-power motors
GB/T 13793-1992 Longitudinal electric resistance welded steel tubes
GB/T 13793-2008 Steel pipes with a longitudinal electric (resistance) weld
GB/T 13793-2016 Steel pipes with a longitudinal electric(resistance) weld
GB/T 14486-1993 Dimensional tolerances for plastic engineering moulded plastic pats
GB/T 14486-2008 Dimensional tolerances for moulded plastic parts
JG/T 241-2009 Blinds and shutters—Mechanical endurance—Test methods
JG/T 276-2010 Technical requirements for electrical equipment of building shading product
GB/T 755-2025 Rotating electrical machines—Rating and performance