GB/T 12232-2005
Replaced
GB/T 12232-2025
Active
National standards
GB/T 12232-2025 General purpose industrial valves—Flanged iron gate valves
GB/T 12232-2025 General purpose industrial valves—Flanged iron gate valves
Price:
$ 54
Basic Information
Standard Code:
GB/T 12232-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nValve
ICS Name:
Gate valve
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Pages:
16 pages
Scope
This document specifies the structural type, technical requirements, test methods, inspection rules, marking, and supply requirements for flange-connected iron gate valves.
This document is applicable to the design, production, and inspection of flange-connected gray cast iron and nodular cast iron gate valves (hereinafter referred to as "gate valves") with nominal pressures of PN2.5~PN25 and nominal sizes of DN50~DN2000.
Development Information
Replace the following standards
Referenced Standards
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 5796.1-1986 Metric trapezoidal screw threads—Profile
GB/T 5796.1-2005 Trapezoidal screw threads—Part 1:Profiles
GB/T 5796.1-2022 Trapezoidal screw threads—Part 1:Profiles
GB/T 5796.2-1986 Metric trapezoidal screw threads—System of diameter and pitch
GB/T 5796.2-2005 Trapezoidal screw threads—Part 2:General plan
GB/T 5796.2-2022 Trapezoidal screw threads—Part 2:General plan
GB/T 5796.3-1986 Metric trapezoidal screw threads—Basic dimensions
GB/T 5796.3-2005 Trapezoidal screw threads—Part 3:Basic dimensions
GB/T 5796.3-2022 Trapezoidal screw threads—Part 3:Basic dimensions
GB/T 5796.4-1986 Metric trapezoidal screw threads—Tolerances
GB/T 5796.4-2005 Trapezoidal screw threads—Part 4:Tolerances
GB/T 5796.4-2022 Trapezoidal screw threads—Part 4:Tolerances
GB/T 12220-1989 General purpose industrial valves—Marking
GB/T 12220-2015 Industrial valves—Marking
GB/T 12221-1989 Metal valves for use in flanged pipe systems—Face-to -face and centre-to-face dimensions
GB/T 12221-2005 Metal valves—Face to face,end to end,center to face and center to end dimensions
GB/T 12221-2025 Metal valves—Face to face,end to end,centre to face and centre to end dimensions
GB/T 12222-2005 Multi-turn valve actuator attachments
GB/T 12222-2023 Multi-turn valve actuator attachments
GB/T 13927-1992 Pressure testing for general purpose valves
GB/T 13927-2008 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 17219-2025 Hygienic safety evaluation of distribution equipment,protective materials and treatment materials in drinking water system
GB/T 17241.1-1998 Synoptic table for cast iron pipe flanges
GB/T 17241.1-2024 Cast iron pipe flanges—Part 1:PN designated
JB/T 7928-2014 Industrial Valve Supply Requirements
JB/T 7928-1999 JBT 7928-1999 General valve Supply requirements
Related Standards
GB/T 12224-2005
Replaced
GB/T 12224-2005 General requirements for industrial steel valves
GB/T 12234-2007
Replaced
GB/T 12234-2007 Bolted bonnet steel gate valves for petroleum and natural gas industries
GB/T 10869-2008
Active
GB/T 10869-2008 Control valves for power station
GB/T 24924-2010
Active
GB/T 24924-2010 Resilient-seated gate valves for water supply service
GB/T 32290-2015
Active