GB/T 14951-2007 Replaced National standards

GB/T 14951-2007 Measurement method of fuel saving technology for automobiles

GB/T 14951-2007 Measurement method of fuel saving technology for automobiles

Publish Date: 2007-01-24 Implement Date: 2007-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 14951-2007

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Material consumption and energy conservation in transportation

ICS Name: Comprehensive Road Vehicles

Publish Date: 2007-01-24

Implement Date: 2007-08-01

Pages: 14 pages

Scope

This standard specifies the evaluation indicators, test methods, and data processing for in-use automotive fuel-saving technologies, as well as the calculation of evaluation items. This standard is applicable to the evaluation of the effectiveness of various fuel-saving technologies used in in-use automobiles.

Development Information

Word Count: 26 Thousand words Pages: 14 pages

Replace the following standards

GB/T 14951-1994 Measurement method of fuel saving technology for automobiles GB/T 17752-1999 Test and evaluation methods on fuel-saving additives of auto-fuel GB/T 17753-1999 Test and evaluation methods on fuel-saving additives of Auto-Engine oil

Superseded by the following standards

GB/T 14951-2023 Measurement method of fuel saving technology for automobiles

Referenced Standards

GB 18352(所有部分) GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity GB/T 3142-1982 Lubricants—Determination of load-carrying capacity (four balls method) GB/T 3142-2019 Standard test method for determination of load-carrying capacity of lubricants—Four-ball method GB/T 3535-1983 Petroleum oils—Determination of pour point GB/T 3535-2006 Petroleum products—Determination of pour point GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method GB 3847-1999 Limits and measurement methods for exhaust visible pollutants from compression ignition(C.I.) engines and vehicles equipped with C.I. engines GB/T 5096-1985 Petroleum products—Corrosiveness to copper—Copper strip test GB/T 5096-2017 Test method for corrosiveness to copper from petroleum products by copper strip test GB/T 12534-1990 Motor vehicles—General rules of road test method GB/T 12543-1990 Motor vehicles—Acceleration performance—Test method GB/T 12543-2009 Acceleration performance test method for motor vehicles GB/T 12545.2-2001 Commercial vehicle—Fuel consumption test method GB 18285-2000 Limits and measurement methods for exhausts of pollutants from in-use vehicles GB/T 18297-2001 Performance test code for road vehicle engines GB/T 18297-2024 Performance test code for road vehicle engines GB 3847-2018 Limits and measurement methods for emissions form diesel vehicles under free acceleration and lugdown cycle GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. GB/T 3535-2025 Determination of pour point for petroleum products

Related Standards

GB/T 4352-1984 Replaced

GB/T 4352-1984 Fuel consumption for trucks in operation

Publish Date: 1984-04-30

GB/T 4353-1984 Replaced

GB/T 4353-1984 Fuel consumption for passenger vehicles in operation

Publish Date: 1984-04-30

GB/T 4971-1985 Replaced

GB/T 4971-1985 Terms and definitions—Automotive ride comfort

Publish Date: 1985-03-02

GB/T 5902-1986 Replaced

GB/T 5902-1986 Method of pulse input running test-Automobile ride comfort

Publish Date: 1986-03-05

GB/T 7031-1986 Replaced

GB/T 7031-1986 Vehicle vibration—Describing method for road surface irregularity

Publish Date: 1986-11-25

GB/T 918.1-1989 Abolished

GB/T 918.1-1989 Classification and code for road vehicles—Motor vehicle

Publish Date: 1989-03-27