GB/T 28563-2012 Replaced National standards

GB/T 28563-2012 Electrical testing of thyristor valves for ±800 kV ultra high voltage direct current (UHVDC) power transmission

GB/T 28563-2012 Electrical testing of thyristor valves for ±800 kV ultra high voltage direct current (UHVDC) power transmission

Publish Date: 2012-06-29 Implement Date: 2012-11-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 28563-2012

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Power semiconductor devices and components

ICS Name: Rectifiers, converters, and regulated power supplies

Publish Date: 2012-06-29

Implement Date: 2012-11-01

Pages: 36 pages

Scope

This standard applies to thyristor valves used in ±800 kV high-voltage direct current (HVDC) power transmission systems, where the phase-shifting converters are directly connected to the valves at both ends and are equipped with metal oxide surge arresters. This standard is limited to electrical type testing and product testing.
The tests specified in this standard are based on air-insulated, water-cooled valves. Other types of valves may also refer to the requirements and acceptance criteria of this standard.

Development Information

Word Count: 69 Thousand words Pages: 36 pages

Superseded by the following standards

GB/T 20990.1-2020 Thyristor valves for high voltage direct current (HVDC) power transmission—Part 1:Electrical testing

Referenced Standards

GB/T 7354-2003 Partial discharge measurements GB/T 13498-2007 Terminology for high-voltage direct current(HVDC)transmission GB/T 20989-2007 Determination of power losses in high-voltage direct current(HVDC)converter stations GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules GB 11032-2000 Metal oxide surge arresters without gaps for a.c.systems GB/T 11032-2010 Metal-oxide surge arresters without gaps for a.c. systems GB/T 11032-2020 Metal-oxide surge arresters without gaps for a.c. systems GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories

Adopt standards

IEC 60700-1:2008

Related Standards

GB 7228-1987 Abolished

GB 7228-1987 Measuring and calculating method on efficiency of rectifiers and their consumers energy-conversion efficiency in electro-chemical industry

Publish Date: 1987-02-03

GB/T 13422-1992 Replaced

GB/T 13422-1992 Power semiconductor converters Electrical test methods

Publish Date: 1992-04-13

GB/T 3859.1-1993 Replaced

GB/T 3859.1-1993 Semiconductor convertors—Specification of basic requirements

Publish Date: 1993-12-27

GB/T 3859.2-1993 Replaced

GB/T 3859.2-1993 Semiconductor convertors—Application guide

Publish Date: 1993-12-27

GB/T 3859.3-1993 Replaced

GB/T 3859.3-1993 Semiconductor convertors—Transformers and reactors

Publish Date: 1993-12-27

GB/T 16859-1997 Active

GB/T 16859-1997 Terminal markings for valve device stacks and assemblies and for power convertor equipment

Publish Date: 1997-06-11