GB/T 70.4-2025 Active National standards

GB/T 70.4-2025 Fasteners—Hexagon socket screws—Part 4:Hexagon socket button head screws with collar and reduced loadability

GB/T 70.4-2025 Fasteners—Hexagon socket screws—Part 4:Hexagon socket button head screws with collar and reduced loadability

Publish Date: 2025-10-31 Implement Date: 2026-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 70.4-2025

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2025-10-31

Implement Date: 2026-02-01

Publisher: 国家市场监督管理总局、国家标准化管理委员会

Technical Committee: 全国紧固件标准化技术委员会(SAC/TC 85)

Pages: 20 pages

Scope

本文件规定了由于头部结构而降低承载能力内六角平圆头凸缘螺钉的型式尺寸,技术要求,标志、标签及标记。
本文件适用于螺纹规格为M3~M16,粗牙螺纹,性能等级为8.8、10.9级,产品等级为A级,降低承载能力,钢制内六角平圆头凸缘螺钉(以下简称“螺钉”)。
注:需对降低承载能力(与本文件中规定的头部尺寸和内六角插入深度有关)的最小拉力载荷进行标记(性能等级前增加“0”)。对于所有规格和所有性能等级,头部承载能力按全承载能力的80%计算(见表4)。

Development Information

Drafting Units:

雁栖湖基础制造技术研究院(北京)有限公司、吉利汽车研究院(宁波)有限公司、浙江美日智能装备有限公司、玉环拓跃机械有限公司、玉环市春晖车桥股份有限公司

Word Count: 19 Thousand words Pages: 20 pages

Same series standard

GB/T 70.2-2025 Fasteners—Hexagon socket screws—Part 2:Hexagon socket button head screws with reduced loadability

Replace the following standards

GB/T 70.4-2015 Hexagon socket button head screws with collar

Referenced Standards

GB/T 2-2001 Fasteners—Ends of parts with external thread GB/T 2-2016 Fasteners—Ends of parts with external thread GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 197-2018 General purpose metric screw threads—Tolerances GB/T 1237-2000 Designation system for fasteners GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3099.4-2021 Terminology of fasteners—Control,inspection,delivery,acceptance and quality GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts GB/T 3106-2016 Fasteners—Bolts,screws and studs—Nominal lengths and thread lengths GB/T 5267.1-2002 Fasteners—Electroplated coatings GB/T 5267.1-2023 Fasteners—Electroplate coating GB/T 5267.2-2002 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2017 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5267.2-2021 Fasteners—Non-electrolytically applied zinc flake coatings GB/T 5276-2015 Fasteners—Bolts,screws,studs and nuts—Symbols and descriptions of dimensions GB/T 5779.1-2000 Fasteners—Surface discontinuities—Bolts,screws and studs for general requirements GB/T 16938-1997 Fasteners—General requirements for blots,screws,studs and nuts GB/T 16938-2008 Fasteners—General requirements for bolts,screws,studs and nuts

Adopt standards

ISO 7380-2:2022

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02