GB/T 16400-1996
Replaced
T/CADBM 12-2019
Active
Group standards
T/CADBM 12-2019 Ceiling light anodized aluminum coil board
T/CADBM 12-2019 Ceiling light anodized aluminum coil board
Price:
$ 28.00
Basic Information
Standard Code:
T/CADBM 12-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Non-ferrous metals and their alloy products
ICS Name:
Other building materials
Publish Date:
2019-07-09
Implement Date:
2019-08-09
Pages:
20 pages
Scope
This standard specifies the terms and definitions, classification, designations and markings, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of aluminum oxide alloy coil plates. This standard applies to all treated light aluminum oxide coil plates.
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits
GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition
GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys
GB/T 3880.2-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current
GB/T 6388-1986 Transport package shipping mark
GB/T 6462-1986 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6462-2005 Metallic and oxide coatings—Measurement of coating thickness—Microscopical method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 8752-1988 Anodizing of aluminium and aluminium alloys—Check of continuity of thin anodic oxide coatings—Copper sulphate test
GB/T 8752-2006 Anodizing of aluminium and its alloys—Check of continuity of thin anodic oxide coating—Copper sulphate test
GB/T 9276-1996 Methods of exposure to natural weathering of coating
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9753-1988 Paints and varnishes—Cupping test
GB/T 9753-2007 Paints and varnishes—Cupping test
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 9761-2008 Paints and varnishes—Visual comparison of the colour of paints
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 11186.2-1989 Methods for measuring the color of paint films—Part 2:Colour measurement
GB/T 11186.3-1989 Methods for measuring the color of paint films—Part 3:Calculation of color differences
GB/T 12967.5-1991 Anodizing of aluminium and aluminium alloys—Assessment of resistance of anodic oxide coatings to cracking by deformation
GB/T 12967.5-2013 Test methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation
GB/T 12967.5-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking
GB/T 12967.6-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys—Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method
GB/T 16585-1996 Rubber, vulcanized—Test method of resistance to artificial weathering (Fluorescent UV lamp)
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method
GB/T 6462-2025 Metallic and oxide coatings—Measurement of coating thinckness—Microscopical method
Related Standards
GB/T 16401-1996
Replaced
GB/T 16401-1996 Test method for water absorption of mineral wool products
GB/T 17748-1999
Replaced
GB/T 17748-1999 Aluminium-plastic composite panel
GB/T 8627-1999
Replaced
GB/T 8627-1999 Test method for density of smoke from the burning or decomposition of building materials
JG/T 167-2004
Replaced
JG/T 167-2004 Carbon fiber laminate for strengthening and restoring structures
JG/T 206-2007
Replaced