GB 17646-1998
Replaced
GB/T 29412-2012
Active
National standards
GB/T 29412-2012 Adsorber of pressure swing adsorption for hydrogen purification
GB/T 29412-2012 Adsorber of pressure swing adsorption for hydrogen purification
Basic Information
Standard Code:
GB/T 29412-2012
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
New energy and other
ICS Name:
Wind power generation systems and other energy sources
Publish Date:
2012-12-31
Implement Date:
2013-10-01
Pages:
12 pages
Scope
This standard specifies the basic requirements, materials, design, manufacturing, inspection and testing, and marking, packaging, and transportation for adsorbers used in hydrogen purification by pressure swing adsorption.
This standard applies to adsorbers used in hydrogen purification by pressure swing adsorption with a design pressure of greater than or equal to 0.1 MPa and less than 10 MPa, and a vacuum degree of not less than 0.02 MPa.
Development Information
Referenced Standards
JB/T 4700
JB/T 4730.2
JB 4732
GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance
GB 713-1997 Steel plates for boilers
GB 713-2008 Steel plates for boilers and pressure vessels
GB/T 713-2014 Steel plates for boilers and pressure vessels
GB/T 713.1-2023 Steel plate,sheet and strip for pressure equipments—Part 1:General requirements
GB/T 713.2-2023 Steel plate,sheet and strip for pressure equipments—Part 2:Non-alloy and alloy steel with specified temperature properties
GB/T 713.3-2023 Steel plate,sheet and strip for pressure equipments—Part 3:Low alloy steel with specified low temperature properties
GB/T 713.4-2023 Steel plate,sheet and strip for pressure equipments—Part 4:Nickel-alloy steels with specified low temperature properties
GB/T 713.5-2023 Steel plate,sheet and strip for pressure equipments—Part 5:High manganese steel with specified low temperature properties
GB/T 713.6-2023 Steel plate, sheet and strip for pressure equipments—Part 6:Quenched and tempered high strength steel
GB/T 713.7-2023 Steel plate,sheet and strip for pressure equipments—Part 7:Stainless steel and heat resisting steel
GB/T 5330-2003 Industrial woven metal wire cloth (square opening series)
GB/T 5330.1-2000 Industrial wire screens and woven wire cloth—Guide to the choice of aperture size and wire diameter combinations—Part 1:Generalities
GB/T 5330.1-2012 Industrial wire screens and woven wire cloth—Guide to the choice of aperture size and wire diameter combinations—Part 1:Generalities
GB 12337-1998 Steel spherical tanks
GB/T 12337-2014 Steel spherical tanks
GB/T 20663-2006 Bladder type accumulators
GB/T 20663-2017 Accumulators
NB/T 47008-2017 Carbon steel and alloy steel forgings used in pressure equipment
JB/T 4711-2003 Coating and packing for pressure vessels transport
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing
JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing
NB/T 47008-2010 Carbon and alloy steel forgings for pressure equipments
GB/T 713.8-2025 Steel plate,sheet and strip for pressure equipments—Part 8:Rolled homogeneous and heterogeneous clad steel plate
GB/T 5330-2025 Industrial woven metal wire cloth(square opening series)
GB/T 20663-2026 Accumulators
Related Standards
GB 18451.1-2001
Replaced
GB 18451.1-2001 Wind turbine generator systems—Safety requirements
GB/T 2900.53-2001
Active
GB/T 2900.53-2001 Electrotechnical terminology—Wind turbine generator systems
GB/T 18709-2002
Active
GB/T 18709-2002 Methodology of wind energy resource measurement for wind farm
GB/T 18710-2002
Active
GB/T 18710-2002 Methodology of wind energy resource assessment for wind farm
GB/T 4750-2002
Replaced