GB/T 11849-1989
Replaced
GB/T 12337-2014
Active
National standards
GB/T 12337-2014 Steel spherical tanks
GB/T 12337-2014 Steel spherical tanks
Basic Information
Standard Code:
GB/T 12337-2014
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Pressure vessel
ICS Name:
Fixed containers and tanks
Publish Date:
2014-09-03
Implement Date:
2015-02-01
Pages:
86 pages
Scope
1.1 This standard specifies the requirements for the design (including rule-based design and analytical design, the same below), manufacture, assembly welding, inspection, and acceptance of steel spherical storage tanks (hereinafter referred to as "spherical tanks").
1.2 This standard applies to spherical tanks with a design pressure not exceeding 6.4 MPa and a design temperature range based on the orange-peel or mixed type allowable use temperature of steel, supported by pillars.
1.3 This standard does not apply to the following spherical tanks:
a) Spherical tanks in nuclear energy devices;
b) Spherical tanks subject to relative motion (such as those carried by vehicles or ships);
c) Spherical tanks with a nominal volume of less than 50 m3;
d) Spherical tanks with a double-layer structure.
Development Information
Replace the following standards
Referenced Standards
GB/T 6803-2023 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
GB/T 8162-1999 Seamless steel tubes for structural purposes
GB/T 8162-2008 Seamless steel tubes for structural purposes
GB/T 8162-2018 Seamless steel tubes for structural purposes
GB/T 8163-1999 Seamless steel tubes for liquid service
GB/T 8163-2008 Seamless steel tubes for liquid service
GB/T 8163-2018 Seamless steel pipes for liquid service
GB 9948-1988 Seamless steel tubes for petroleum cracking
GB 9948-2006 Seamless steel tubes for petroleum cracking
GB/T 9948-2013 Seamless steel tubes for petroleum cracking
GB/T 9948-2025 Seamless steel tubes and pipes for petrochemical and chemical facilities
GB/T 12771-2000 Welded stainless steel pipes for liquid delivery
GB/T 12771-2008 Welded stainless steel pipes for liquid delivery
GB/T 12771-2019 Welded stainless steel pipes for fluid transport
GB 13296-1991 Seamless stainless steel tubes for boiler and heat exchanger
GB 13296-2007 Seamless stainless steel tubes for boiler and heat exchanger
GB/T 13296-2013 Seamless stainless steel tubes for boiler and heat exchanger
GB/T 13296-2023 Seamless stainless steel tubes for boiler and heat exchanger
GB/T 14976-2002 Stainless steel seamless tubes for fluid transport
GB/T 14976-2012 Seamless stainless steel pipes for fluid transport
GB/T 14976-2025 Seamless stainless steel pipes for fluid transport
GB/T 17261-1998 Spherical tanks type and data base
GB/T 17261-2011 Steel spherical tanks type and dimension data base
GB/T 18591-2001 Welding—Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
GB 19189-2003 Quenched and tempered high strength steel plates for pressure vessels
GB/T 19189-2011 Quenched and tempered high strength steel plates for pressure vessels
GB/T 20878-2007 Stainless and heat-resisting steels—Designation and chemical composition
GB/T 20878-2024 Stainless steels—Designation and chemical composition
GB/T 21433-2008 Detecting susceptibility to intergranular corrosion in stainless steel pressure vessels
GB/T 24511-2009 Stainless steel plate,sheet and strip for pressure equipments
GB/T 24511-2017 Stainless steel and heat resisting steel plate,sheet and strip forpressure equipments
GB/T 26929-2011 Terminology for pressure vessels
GB 50009-2012 Load code for the design of building structures
GB 50011-2010 Code for seismic design of buildings
GB 50017-2017 Code for design of steel structures
JB /T 4711
JB/T 4730.1
JB/T 4730.2
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing
JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing
JB/T 4730.6-2005 Nondestructive testing of pressure equipments—Part 6:Eddy current testing
JB 4732-1995
NB/T 47008-2017 Carbon steel and alloy steel forgings used in pressure equipment
NB/T 47008-2010 Carbon and alloy steel forgings for pressure equipments
NB/T 47009-2017 Low-temperature pressure-bearing equipment alloy steel for forging
NB/T 47009-2010 Low-alloy steel forgings for low temperature pressure equipments
NB/T 47010-2017 Stainless steel and heat-resistant steel forgings used in pressure equipment
NB/T 47010-2010 Stainless and heat-resisting steel forgings for pressure equipments
NB/T 47013.10(JB/T 4730.10)
NB/T 47014-2023 Pressure equipment welding process qualification
NB/T 47015-2023 Stress vessel welding procedure
NB/T 47016-2023 The mechanical properties of welded specimens for pressure equipment products are tested
NB/T 47018.1(JB/T 4747.1)
NB/T 47018.2(JB/T 4747.2)
NB/T 47018.3(JB/T 4747.3)
NB/T 47018.4(JB/T 4747.4)
TSG R0004-2009 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
Related Standards
GB/T 13235.1-1991
Replaced
GB/T 13235.1-1991 Petroleum and liquid petroleum products—Volumetric calibration of vertical cylindrical metal tanks—Strapping method
GB/T 13235.2-1991
Active
GB/T 13235.2-1991 Petroleum and liquid petroleum products—Volumetric calibration of vertical cylindrical metal tanks—Optical reference line method
GB/T 15181-1994
Active
GB/T 15181-1994 Capacity calibration of spherical metal tanks—Strapping method
GB 12337-1998
Replaced
GB 12337-1998 Steel spherical tanks
GB/T 11849-2008
Active