GB/T 713.5-2023 Active National standards

GB/T 713.5-2023 Steel plate,sheet and strip for pressure equipments—Part 5:High manganese steel with specified low temperature properties

GB/T 713.5-2023 Steel plate,sheet and strip for pressure equipments—Part 5:High manganese steel with specified low temperature properties

Publish Date: 2023-08-06 Implement Date: 2024-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 713.5-2023
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: \nSteel plates and steel strips
ICS Name: Flat steel and semi-finished products
Publish Date: 2023-08-06
Implement Date: 2024-03-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国钢标准化技术委员会(SAC/TC 183)
Pages: 7 pages

Scope

本文件规定了承压设备用规定低温性能的高锰钢的牌号表示方法、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。本文件适用于使用温度不低于-196 ℃、厚度为5 mm~60 mm的规定低温性能的高锰钢板(以下简称钢板)。

Development Information

Drafting Units:

东北大学、南京钢铁股份有限公司、鞍钢股份有限公司、山西太钢不锈钢股份有限公司、舞阳钢铁有限责任公司、湖南华菱湘潭钢铁有限公司、湖南华菱涟源钢铁有限公司、南阳汉冶特钢有限公司、华北理工大学、冶金工业信息标准研究院、合肥通用机械研究院有限公司、中石化广州工程有限公司、首钢集团有限公司、中国船级社大连分社

Drafting Persons:

刘振宇、陈俊、孙超、朴志民、孟传峰、韦明、杨建华、梁亮、李忠波、张维旭、张福成、章小浒、张国信、柴玉国、徐博文、曹光明、张维娜、孙梦寒、范益、严玲、张彦睿、莫德敏、周文浩、刘宁、康文举、冯晓勇、秦丽晔、李成刚

Word Count: 11 Thousand words Pages: 7 pages

Same series standard

Referenced Standards

GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content GB/T 223.40-2007 Iron,steel and alloy—Determination of niobium content by the sulphochlorophenol S spectrophotometric method GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.63-1988 Methods for chemical analysis of iron,steel and alloy—The sodium(potassium)periodate photometric method for the determination of manganese content GB/T 223.63-2022 Iron,steel and alloy—Determination of manganese content—Sodium(potassium) periodate spectrophotometric method GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content GB/T 223.85-2009 Steel and iron—Determination of sulfur content—Infrared absorption method after combustion in an induction furnace GB/T 223.86-2009 Steel and iron—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 713.1-2023 Steel plate,sheet and strip for pressure equipments—Part 1:General requirements GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method) GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition GB/T 20123-2006 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20125-2006 Low-alloy steel—Determination of multi-element contents—Inductively coupled plasma atomic emission spectrometric method NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method

Related Standards

Contact Us