GB/T 223.55-2008
Abolished
National standards
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
GB/T 223.55-2008 Iron,steel and alloy—Determination of tellurium content—Oscillo-polarographic method
Basic Information
Standard Code:
GB/T 223.55-2008
Standard Type:
National standards
Standard Status:
Abolished
is_force_gb:
no
CCS Name:
Analysis methods for steel and iron alloys
ICS Name:
Black metal comprehensive
Publish Date:
2008-05-13
Implement Date:
2008-11-01
Pages:
7 pages
Scope
This part of GB/T 223 specifies the determination of tellurium content in steel and alloys by oscillopolarography (direct) and oscillopolarography with thioglucose cotton separation.
The oscillopolarography (direct) method in this part is suitable for the determination of tellurium content in pure iron, raw cast iron, and low-alloy steel with a mass fraction of 0.001% to 0.050%; the oscillopolarography with thioglucose cotton separation method in this part is suitable for the determination of tellurium content in raw cast iron, high-, medium-, and low-alloy steel, and high-temperature alloys with a mass fraction of 0.000 04% to 0.001%.
Development Information
Same series standard
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.69-2008 Iron,steel and alloy—Determination of carbon contents—Gas-volumetric method after combustion in the pipe furnace
GB/T 223.70-2008 Iron,steel and alloy—Determination of iron contents—o-Phenanthroline spectrophotometric method
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.73-2008 Iron,steel and alloy—Determination of iron contents—Titanium trichloride-potassium dichromate titration method
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
Replace the following standards
GB/T 223.55-1987
GB/T 223.56-1987
Referenced Standards
Related Standards
GB/T 17616-1998
Replaced
GB/T 5686.4-1998
Replaced
GB/T 5686.4-1998 Methods for chemical analysis of silicomanganese—The phosphomolybdenum blue phtometric method for the determination of phosphorus content
GB/T 18255-2000
Replaced
GB/T 18255-2000 Coking viscous oil products—Determination of distillation range
GB/T 4223-2004
Replaced
GB/T 4223-2004 Iron and steel scraps
GB/T 20066-2006
Active
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
GB/T 11261-2006
Active