GB/T 13663-2000
Replaced
GB/T 5836.2-2018
Active
National standards
GB/T 5836.2-2018 Unplasticized poly(vinyl chloride)(PVC-U) fittings for soil and waste discharge inside buildings
GB/T 5836.2-2018 Unplasticized poly(vinyl chloride)(PVC-U) fittings for soil and waste discharge inside buildings
Basic Information
Standard Code:
GB/T 5836.2-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plastic profiles
ICS Name:
Plastic pipes, fittings, and valves
Publish Date:
2018-12-28
Implement Date:
2019-07-01
Publisher:
国家市场监督管理总局、中国国家标准化管理委员会
Technical Committee:
全国塑料制品标准化技术委员会(SAC/TC 48)
Pages:
21 pages
Scope
GB/T 5836的本部分规定了建筑排水用硬聚氯乙烯（PVCU）管件（以下简称“管件”）的术语、定义和符号、材料、产品分类、要求、试验方法、检验规则、标志、运输和贮存。本部分适用于以聚氯乙烯（PVC）树脂为主要原料，经注塑成型的建筑物内排水系统用管件。在考虑了材料的耐化学性和耐热性满足使用要求的情况下，也可用于工业排水用管件。本部分规定的管件与GB/T 5836.1-2018规定的管材配套使用。
Development Information
Drafting Units:
广东联塑科技实业有限公司、成都川路塑胶集团有限公司、永高股份有限公司、顾地科技股份有限公司、浙江中财管道科技股份有限公司、福建集友塑料有限公司、中山环宇实业有限公司、南亚塑胶工业(厦门)有限公司、南塑建材塑胶制品(深圳)有限公司、福建亚通新材料科技股份有限公司、日丰企业集团有限公司
Drafting Persons:
张慰峰、贾立蓉、黄剑、李贤梅、王百提、林漳鸿、曾镇国、林彦清、吴出华、彭伏弟、李白千、李统一
Same series standard
Replace the following standards
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1633-2000 Plastics—Thermoplastic materials—Determination of Vicat softening temperature(VST)
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 5761-2006 Suspension polyvinyl chloride resins of general purpose
GB/T 5836.1-2018 Unplasticized poly(vinyl chloride)(PVC-U)pipes for soil and waste discharge inside buildings
GB/T 8801-2007 Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling
GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings—Hot oven test method
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 19278-2018 General terms and their definitions of thermoplastic pipes,fittings and valves
GB/T 21873-2008 Rubber seals—Joint rings for water supply,drainage and sewerage pipelines—Specification for materials
GB/T 26125-2011 Electrical and electronic products—Determination of six regulated substances(lead,mercury,cadmium,hexavalent chromium,polybrominated biphenyls,polybrominated diphenyl ethers)
QB/T 2568-2002 Adhesive for solvent-based PVC-U plastic pipe system
Related Standards
GB/T 18251-2000
Replaced
GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 18252-2000
Replaced
GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 18477-2001
Replaced
GB/T 18477-2001 Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil, waste and drainage
GB/T 18742.1-2002
Replaced
GB/T 18742.1-2002 Polypropylene piping systems for hot and cold water installations—Part 1:General
GB/T 18742.2-2002
Replaced