GB 6932-2001
Replaced
GB/T 29730-2013
Replaced
National standards
GB/T 29730-2013 Distribution manifold of cold/hot water
GB/T 29730-2013 Distribution manifold of cold/hot water
Basic Information
Standard Code:
GB/T 29730-2013
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
HVAC and air conditioning equipment for buildings
ICS Name:
The facilities in the building
Publish Date:
2013-09-18
Implement Date:
2014-06-01
Pages:
16 pages
Scope
This standard specifies the terms and definitions, structure, dimensions, and markings of cold and hot water manifolds (referred to as manifolds) used in heating and air conditioning systems, as well as general provisions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage.
This standard applies to cold and hot water manifolds used in air conditioning and heating water systems in civil and industrial building projects (with a water temperature range of 5°C to 95°C), where the working pressure does not exceed 0.8 MPa and the connection pipe diameter does not exceed DN32.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 1220-1992 Stainless steel bars
GB/T 1220-2007 Stainless steel bars
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 5231-2012 Designation and chemical composition of wrought copper and copper alloys
GB/T 5231-2022 Designation and chemical composition of wrought copper and copper alloys
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 11379-1989 Metallic coatings—Electroplated coatings of chromium for engineering purposes
GB/T 11379-2008 Metallic coatings—Electroplated coatings of chromium for engineering purposes
GB/T 13912-2002 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
GB/T 13912-2020 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
GB/T 13927-1992 Pressure testing for general purpose valves
GB/T 13927-2008 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
YS/T 583-2006 Brass rods and bars for forging plumbing fittings
YS/T 583-2016 Brass bars for forging plumbing fittings
JGJ 142-2012 Technical specification for radiant heating and cooling
Related Standards
GB/T 19249-2003
Replaced
GB/T 19249-2003 Reverse osmosis water treatment equipment
GB/T 19913-2005
Replaced
GB/T 19913-2005 Cast iron heating radiator
CJ/T 245-2007
Abolished
CJ/T 245-2007 Syphonic roof outlet
CJ/T 133-2007
Replaced
CJ/T 133-2007 Integrated circuit card water meter
CJ/T 241-2007
Active