GB/T 14627-1993
Replaced
GB/T 11805-2019
Active
National standards
GB/T 11805-2019 General specifications of automatic control components(devices)and their related system for hydroturbine-generating sets
GB/T 11805-2019 General specifications of automatic control components(devices)and their related system for hydroturbine-generating sets
Price:
$ 84
Basic Information
Standard Code:
GB/T 11805-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nHydraulic turbines and their auxiliary equipment
ICS Name:
Hydraulic engineering
Publish Date:
2019-06-04
Implement Date:
2020-01-01
Pages:
25 pages
Scope
This standard specifies the basic technical requirements and system configuration requirements for automation components (devices) used in hydroelectric power station water turbine generators, intake valves, and speed regulation systems, and stipulates the corresponding test methods and acceptance rules, marking, packaging, and other content.
This standard applies to the manufacturing of automation components (devices) for hydroelectric power stations and the system configuration and acceptance of automation components (devices) for hydroelectric turbine generators meeting one of the following conditions:
a) Single-machine capacity of 10 MW or more;
b) Impact turbine units with a nominal diameter of 1.5 m or more;
c) Mixed-flow turbine units with a nominal diameter of 2.5 m or more;
d) Axial-flow, oblique-flow, and through-flow turbine units with a nominal diameter of 3.3 m or more.
For hydroelectric turbine generators, pumped storage reversible units, and tidal power generation units with a nominal diameter smaller than the above range, the system configuration and acceptance of automation components (devices) can be implemented as a reference.
Development Information
Replace the following standards
Referenced Standards
GB/T 14048.1-2012 Low-voltage switchgear and controlgear—Part 1:General rules
JB /T 834
JB/T 8528
GB/T 1048-1990 Nominal pressure for pipe components
GB/T 1048-2005 Pipework components—Definition and selection of PN
GB/T 1048-2019 Pipework components—Definition and selection of nominal pressure
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB 3452.1-1992 Fluid systems—Sealing devices—O-rings—Inside diameters, cross-sections, tolerances and size identification code
GB/T 3452.1-2005 Fluid power systems—O-rings—Part 1:Inside diameters, cross-sections, tolerances and size identification code
GB/T 3452.2-1987 Appearance quality acceptance criteria for rubber O-rings
GB/T 3452.2-2007 Fluid power systems—O-rings—Part 2:Quality acceptance criteria
GB/T 8564-2003 Specification installation of hydraulic turbine generator units
GB/T 8564-2023 Technical specification for installation of hydraulic turbine-generator units
GB 11120-1989 Turbine oils L-TSA
GB 11120-2011 Lubricating oils for turbines
GB/T 12244-1989 General specification for pressure reducing valves
GB/T 12244-2006 General requirements for pressure reducing valves
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 14048.16-2006 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) for rotating electrical machines
GB/T 14048.16-2016 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) forrotating electrical machines
GB 16280-1996 Technical requirements and test methods for line type heat detectors
GB 16280-2005 Line type heat fire detectors
GB 16280-2014 Line type heat fire detectors
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 28570-2012 Technical guide of on-line condition monitoring system for hydraulic turbine and generator units
JB/T 4159-2013 General Technical Requirements for Tropical Electrical Products
HG/T 2579-2008 HG/T 2579-2008 O-ring materials for general hydraulic system
HG/T 2579-1994 O-ring rubber material - Part 1: For general hydraulic systems
GB/T 28570-2025 Technical guide of on-line condition monitoring system for hydraulic turbine and generator units
GB/T 12244-2025 Pressure reducing valves—General requirements
GB/T 14048.16-2025 Low-voltage switchgear and controlgear—Part 8:Control units for built-in thermal protection(PTC) forrotating electrical machines
Related Standards
GB/T 15468-1995
Replaced
GB/T 15468-1995 Fundamental technical requirements for hydraulic turbines
GB/T 15469-1995
Replaced
GB/T 15469-1995 Cavitation pitting evaluation in reaction hydraulic turbines
GB/T 15613-1995
Replaced
GB/T 15613-1995 Code for model acceptance tests of hydraulic turbines
GB/T 16166-1996
Replaced
GB/T 16166-1996 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
GB/T 10969-1996
Replaced