GB/T 25628-2010 Replaced National standards

GB/T 25628-2010 Earth-moving machinery—Tooth

GB/T 25628-2010 Earth-moving machinery—Tooth

Publish Date: 2010-12-01 Implement Date: 2011-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25628-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Construction engineering construction machinery

ICS Name: Earthmoving machinery

Publish Date: 2010-12-01

Implement Date: 2011-03-01

Pages: 11 pages

Scope

This standard specifies the terminology, definitions, classification, requirements, test methods, inspection rules, marking, and packaging of digging teeth.
This standard applies to various forms and specifications of cast digging teeth for earthmoving machinery such as excavators, loaders, dozers, excavator-loaders, and bulldozers.

Development Information

Word Count: 19 Thousand words Pages: 11 pages

Superseded by the following standards

GB/T 25628-2023 Earth-moving machinery—Tooth

Referenced Standards

GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness) GB/T 6414-1999 Castings—System of dimensional tolerances and machining allowances GB/T 6414-2017 Castings—Dimensional tolerances and geometrical tolerances and machining allowances GB/T 21154-2007 Earth-moving machinery—Methods of measuring the masses of whole machines,their equipment and components GB/T 21154-2014 Earth-moving machinery—Methods of measuring the masses of whole machines,their equipment and components

Related Standards

GB/T 6375-1986 Replaced

GB/T 6375-1986 Earth-moving machinery—Method of test for the measurement of draw-bar pull

Publish Date: 1986-05-13

GB/T 6572.2-1986 Replaced

GB/T 6572.2-1986 Excavators terminology—Cable operated type

Publish Date: 1986-07-22

GB/T 13331-1991 Replaced

GB/T 13331-1991 Hydraulic excavators—Methods of measuring lift capacity

Publish Date: 1991-12-16

GB/T 13332-1991 Replaced

GB/T 13332-1991 Hydraulic excavators—Methods of measuring tool forces

Publish Date: 1991-12-16

GB/T 14289-1993 Active

GB/T 14289-1993 Earth-moving machinery—Diagnostic ports

Publish Date: 1993-04-17

GB/T 14780-1993 Replaced

GB/T 14780-1993 Earth-moving machinery—Drain, fill and level plugs

Publish Date: 1993-12-27