JG/T 293-2010 Active Industry standards-The construction industry

JG/T 293-2010 Die-casting aluminum alloy radiator

JG/T 293-2010 Die-casting aluminum alloy radiator

Publish Date: 2010-12-20 Implement Date: 2011-08-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: JG/T 293-2010

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: -

Publish Date: 2010-12-20

Implement Date: 2011-08-01

Pages: 10 pages

Scope

1.1 This standard specifies the terms and definitions, models and markings, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of die-cast aluminum alloy radiators (hereinafter referred to as radiators).
1.2 This standard applies to radiators that use hot water as the heat medium, with a working pressure not exceeding 1.0 MPa and a heat medium temperature not exceeding 95 °C.
1.3 For integral and combined radiators, the pH value of the hot water should be between 7.0 and 8.5, the chloride ion content should not exceed 30 mg/L, and the dissolved oxygen should not exceed 0.1 mg/L; for composite radiators, the pH value of the hot water should be between 7.0 and 12.0, the chloride ion content should not exceed 300 mg/L, and the dissolved oxygen should not exceed 0.1 mg/L. Other water quality indicators should comply with the provisions of GB 1576.

Development Information

Word Count: 16 Thousand words Pages: 10 pages

Referenced Standards

GB/T 1220-1992 Stainless steel bars GB/T 1220-2007 Stainless steel bars GB 1576-2001 Water quality for industrial boilers GB/T 1576-2008 Water quality for industrial boilers GB/T 1576-2018 Water quality for industrial boilers GB/T 1732-1993 Determination of impact resistance of film GB/T 1732-2020 Determination of impact resistance of coating films GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 3190-1996 Wrought aluminium and aluminium alloys—Chemical composition limits GB/T 3190-2008 Wrought aluminium and aluminium alloy——Chemical composition GB/T 3190-2020 Chemical composition of wrought aluminium and aluminium alloys GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture—Part 1:Untreated profiles GB/T 5237.1-2008 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles GB/T 5237.1-2017 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles GB 5237.2-2004 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized colored profiles GB/T 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 2:Anodized profiles GB/T 5237.2-2017 Wrought aluminium alloy extruded profiles for architecture— Part 2:Anodized profiles GB 5237.3-2004 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles GB/T 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrophoretic coating profiles GB/T 5237.3-2017 Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrodeposition coating profiles GB 5237.4-2004 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB/T 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB/T 5237.4-2017 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.5-2004 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB/T 5237.5-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB/T 5237.5-2017 Wrought aluminium alloy extruded profiles for architecture— Part 5:Paint coating profiles GB 5237.6-2004 Wrought aluminium alloy extruded profiles for architecture—Part 6:Thermal barrier profiles GB/T 5237.6-2012 Wrought aluminium alloy extruded profiles for architecture—Part 6:Thermal barrier profiles GB/T 5237.6-2017 Wrought aluminium alloy extruded profiles for architecture—Part 6:Thermal barrier profiles GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 9286-1998 Paints and varnishes—Cross cut test for films GB/T 9286-2021 Paints and varnishes—Cross-cut test GB/T 9791-2003 Chromate conversion coatings on zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys—Test methods GB/T 13754-1992 Test method of thermal output of heat emittor GB/T 13754-2008 Test methods of thermal output of heating radiators GB/T 13754-2017 Test methods of thermal output of heating radiators GB/T 13793-1992 Longitudinal electric resistance welded steel tubes GB/T 13793-2008 Steel pipes with a longitudinal electric (resistance) weld GB/T 13793-2016 Steel pipes with a longitudinal electric(resistance) weld GB/T 15115-1994 Die casting aluminium alloys GB/T 15115-2009 Die casting aluminum alloys GB/T 15115-2024 Die casting aluminum alloys HG/T 3312-2000 110 Methyl Vinyl Silicone Rubber GB/T 9791-2025 Metallic and other inorganic coatings—Chromate conversion coatings on zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys—Test methods

Related Standards

DZ/T 0101.12-1994 Active

DZ/T 0101.12-1994 Geological instrument manufacturing time quota for printed circuit board

Publish Date: 1994-01-27

JJG 204-1980 Active

JJG 204-1980 Meteorological Ventilation Psychrometer

Publish Date: 1980-07-11

SC 53-1980 Active

SC 53-1980 Transfer blade hydraulic steering gear repair quality standard

Publish Date: 1981-07-01

DZ 4-1981 Replaced

\nDZ 4-1981 Method for Compiling Product Models of Geological Instrumentation Equipment

Publish Date: 1981-08-20

SC 69-1982 Active

SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications

Publish Date: 1982-01-20

SC 72-1982 Active

SC 72-1982 Steel Fishing Boat Builder Quality Standards and Mooring Equipment Installation Technical Requirements

Publish Date: 1982-03-30