GB/T 13931-2002
Replaced
T/CAEPI 32-2021
Active
Group standards
T/CAEPI 32-2021 Technical requirement for key equipment of total tailings paste backfill
T/CAEPI 32-2021 Technical requirement for key equipment of total tailings paste backfill
Price:
$ 28.00
Basic Information
Standard Code:
T/CAEPI 32-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Environmental protection equipment
ICS Name:
Waste disposal and treatment equipment and devices
Publish Date:
2021-04-26
Implement Date:
2021-05-01
Pages:
20 pages
Scope
This standard specifies the system configuration and key equipment, technical requirements, testing methods, testing rules, and marking, packaging, transportation, and storage for the full-tailing slurry filling system. This standard applies to the full-tailing slurry filling systems in metal and non-metal mines.
Development Information
Referenced Standards
GB/T 1720-2020 Circle-drawing test of coating films
GB/T 3797-2005 Electrical control assemblies
GB/T 3797-2016 Electrical control assemblies
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4879-1999 Rustproof packaging
GB/T 4879-2016 Rustproof packaging
GB/T 9142-2000 Concrete mixers
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 13333-2018 Concrete pump
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles
GB 16754-1997 Safety of machinery—Emergency stop—Principles for design
GB/T 16754-2008 Safety of machinery—Emergency stop—Principles for design
GB/T 16754-2021 Safety of machinery—Emergency stop function—Principles for design
GB/T 20626.1-2006 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements
GB/T 20626.1-2017 Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements
HG/T 20569-2013 Mechanical mixing equipment
JB/T 2300-2018 JB/T 2300-2018 slewing bearing
JB/T 2300-2011 JBT 2300-2011 Rotary bearing support
JB/T 2300-1999 bearing with rotating element
JB/T 5000.3-2007 Heavy Machinery General Technical Conditions Part 3: Welding Parts
JB/T 5000.3-1998 Heavy Machinery General Technical Conditions - Welding Parts
JB/T 5000.12-1998 Heavy Machinery General Technical Specification for Painting
JB/T 5000.12-2007 Heavy mechanical general techniques and standards-Part 12:Paint
JB/T 5946-2018 JB/T 5946-2018 General Technical Specification for Painting of Construction Machinery
JB/T 5946-1991 Construction Machinery Painting General Technical Specification
JB/T 6996-2007 Heavy Machinery Hydraulic System General Technical Specification
JB/T 6996-1993 Near-type mechanical hydraulic system general technical specification
JB/T 12192-2015 Deep cone concentrator
JB/T 11858-2014 Construction Machinery and Equipment: Concrete Mixer Blade and Bearing Plates
JB/T 13439-2018 Mining Piston-Type Fill Pumping Machine
GB/T 50080-2016 Standard for test method of performance on ordinary fresh concrete
Related Standards
GB/T 19054-2003
Replaced
GB/T 19054-2003 General technical conditions for fuel oil cremator
GB/T 19229.1-2008
Active
GB/T 19229.1-2008 Coal-fired flue gas desulphurization equipment—Part 1:Coal-fired flue gas wet desulphurization equipment
GB/T 21508-2008
Replaced
GB/T 21508-2008 Performance test method for coal-fired flue gas desulphurization equipment
GB/T 21509-2008
Active
GB/T 21509-2008 Denitration equipment of coal-fired flue gas
GB/T 16845-2008
Replaced