GB/T 3215-1982
Replaced
GB/T 26115-2010
Replaced
National standards
GB/T 26115-2010 Centrifugal pulp pump
GB/T 26115-2010 Centrifugal pulp pump
Basic Information
Standard Code:
GB/T 26115-2010
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
pump
ICS Name:
pump
Publish Date:
2011-01-10
Implement Date:
2011-10-01
Pages:
28 pages
Scope
This standard specifies the product classification, design, materials, factory inspection and testing, and shipping preparation for motor-driven horizontal single-stage single-suction and single-stage double-suction centrifugal pulp pumps.
This standard applies to centrifugal pulp pumps (hereinafter referred to as pumps) used in the papermaking or pulp production industries, where the slurry medium temperature is ≤104 ℃ and the concentration is ≤8%.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 3215-1982 Centrifugal pumps for refinery, chemical and petrochemical processes General technical specifications
GB/T 3215-2007 Centrifugal pumps for petroleum petrochemical and natural gas industries
GB/T 3215-2019 Centrifugal pumps for petroleum,petrochemical and natural gas industries
GB/T 3216-2005 Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1 and 2
GB/T 3216-2016 Rotodynamic pumps—Hydraulic performance acceptance tests—Grades 1,2 and 3
GB/T 5656-1994 Technical specifications for centrifugal pumps—Class II
GB/T 5656-2008 Technical specification for centrifugal pumps—ClassⅡ
GB/T 5661-1985 End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing
GB/T 5661-2004 End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing
GB/T 5661-2013 End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing
GB/T 5662-1985 End-suction centrifugalpumps (rating 16 bar)—Designation, nominal duty point and dimensions
GB/T 5662-2013 End-suction centrifugal pumps(rating 1.6 MPa)—Designation,nominal duty point and dimensions
GB/T 7021-1986 Glossary of terms for centrifugal pump
GB/T 7021-2019 Glossary of terms for centrifugal pump
GB/T 9113.1-2000 Integral steel pipe flanges with flat face or raised face
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 17241.6-1998 Integral cast iron pipe flanges
GB/T 17241.6-2008 Integral cast iron flanges
JB/T 4297-2021 Pump product painting technical specification
JB/T 4297-2008 Pump product coating specification for technology
JB/T 6880.1-2013 Pump Grey Iron Pump Component
JB/T 6880.2-2021 JBT 6880.2-2021 Castings for Pumps Part 2: Cast Steel Pumps for Pumps
JB/T 6880.1-1993 Pumping gray iron parts
JB/T 4297-1992 Pump Product Painting Technology Specification
JB/T 6880.2-1993 Pump cast steel parts
JB/T 8097-1999 Methods of measuring and evaluating vibration of pumps
JB/T 8098-1999 Methods of measuring and evaluating noise of pumps
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 3215-2025 Centrifugal pumps for petroleum,petrochemical and natural gas industries
Related Standards
GB/T 5660-1985
Replaced
GB/T 5660-1985 End-suction centrifugal pumps—Baseplate and installation dimensions
GB/T 5661-1985
Replaced
GB/T 5661-1985 End-suction centrifugal pumps—Dimensions of cavities for mechanical seals and for soft packing
GB/T 5662-1985
Replaced
GB/T 5662-1985 End-suction centrifugalpumps (rating 16 bar)—Designation, nominal duty point and dimensions
GB/T 6490.1-1986
Replaced
GB/T 6490.1-1986 Terms and definitions of water-turbine pumps
GB/T 6490.2-1986
Replaced