GB/T 17395-1998
Replaced
GB/T 37605-2025
Active
National standards
GB/T 37605-2025 Welded corrosion resistant alloy pipes and tubes
GB/T 37605-2025 Welded corrosion resistant alloy pipes and tubes
Basic Information
Standard Code:
GB/T 37605-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nSteel pipes, cast iron pipes
ICS Name:
Special-purpose pipe steel
Publish Date:
2025-08-29
Implement Date:
2026-03-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国钢标准化技术委员会(SAC/TC 183)
Pages:
16 pages
Scope
本文件规定了耐蚀合金焊管的订货内容、制造工艺、技术要求、检验规则、包装、标志和质量证明书,描述了相应的试验方法。
本文件适用于公称外径不超过1 016 mm的耐蚀合金焊管(以下简称焊管)。
Development Information
Drafting Units:
浙江久立特材科技股份有限公司、山西太钢不锈钢钢管有限公司、江苏武进不锈股份有限公司、冶金工业信息标准研究院、湖南湘投金天新材料有限公司、浙江永上特材有限公司、江苏圣珀新材料科技有限公司
Drafting Persons:
刘明洲、罗霞、方德伟、王伯文、刘一鸣、周卫国、曾宪山、朱明军、王琳、沈毅英、邵羽、颜丞铭、刘涛、杨帆、何焰、彭盛军
Replace the following standards
Referenced Standards
GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition
GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.4-1988 Methods for chemical analysis of iron, steel and alloy The volumetric method for determination of manganese content by ammonium nitrate oxidation
GB/T 223.4-2008 Alloyed steel—Determination of manganese content—Potentiometric or visual titration method
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.6-1994 Methods for chemical analysis of iron, steel and alloy—The neutralization titrimetric method for the determination of boron content
GB/T 223.6-2025 Iron,steel and alloy—Determination of boron content—Neutralization titrimetric method and spectrophotometric method
GB/T 223.7-2002 Iron powder—Determination of iron content—Potassium dichromate titration method
GB/T 223.8-2000 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation—EDTA titration method for the determination of aluminium content
GB/T 223.8-2025 Iron,steel and alloy—Determination of aluminium content—Titrimetric method and spectrophotometric method
GB/T 223.9-2000 Methods for chemical analysis of iron,steel and alloy The chrom azurol S photometric method for the determination of aluminium content
GB/T 223.9-2008 Iron,steel and alloy—Determination of aluminium content—Chrome azurol S photometric method
GB/T 223.10-2000 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
GB/T 223.12-1991 Methods for chemical analysis of iron, steel and alloy—The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.14-2000 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.16-1991 Methods for chemical analysis of iron, steel and alloy—The chromotropic acid photometric method for the determination of titanium content
GB/T 223.17-1989 Methods for chemical analysis of iron, steel and alloy The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.20-1994 Methods for chemical analysis of iron,steel and alloy The potentiometric titration method for the determination of cobalt content
GB/T 223.21-1994 Methods for chemical analysis of iron, steel and alloy The 5-Cl-PADAB spectrophotometric method for the determination of cobalt content
GB/T 223.22-1994 Methods for chemical analysis of iron, steel and alloy The nitroso-R-salt spectrophotometric method for the determination of cobalt content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.24-1994 Methods for chemical analysis of iron, steel and alloy The extraction separation—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25-1994 Methods for chemical analysis of iron, steel and alloy The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26-1989 Methods for chemical analysis of iron, steel and alloy The thiocyanate direct photometric method for the determination of molybdenum content
GB/T 223.26-2008 Iron,steel and alloy—Determination of molybdenum content—The thiocyanate spectrophotometric method
GB/T 223.27-1994 Methods for chemical analysis of iron, steel and alloy The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28-1989 Methods for chemical analysis of iron, steel and alloy The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.29-2008 Iron,steel and alloy—Determination of lead content—Carrier precipitation-xylenol orange spectrophotometric method
GB/T 223.30-1994 Methods for chemical analysis of iron, steel and alloy The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
GB/T 223.31-1994 Methods for chemical analysis of iron, steel and alloy The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
GB/T 223.31-2008 Iron,steel and alloy—Determination of arsenic content—Distillation-molybdenum blue spectrophotometric method
GB/T 223.31-2026 Iron, steel and alloy—Determination of arsenic content—Spectrophotometric method and iodimetric method
GB/T 223.32-1994 Methods for chemical analysis of iron, steel and alloy The hypophosphite reduction-iodimetric method for the determination of arsenic content
GB/T 223.33-1994 Methods for chemical analysis of iron, steel and alloy The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy—The determination of hydrochloric acid-insoluble content of iron powders
GB/T 223.36-1994 Methods for chemical analysis of iron, steel and alloy The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.37-1989 Methods for chemical analysis of iron, steel and alloy The indophenol blue photometric method for the determination of nitrogen content after distillation separation
GB/T 223.37-2020 Iron,steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation
GB/T 223.38-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-gravimetric method for the determination of niobium content
GB/T 223.39-1994 Methods for chemical analysis iron,steel and alloy The sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.40-1985 Methods for chemical analysis of iron, steel and alloy—The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
Related Standards
GB/T 17396-1998
Replaced
GB/T 17396-1998 Seamless hot—Rolled steel tubes for hydraulic pillar service
GB/T 5312-1999
Replaced
GB/T 5312-1999 Carbon and carbon-manganese steel seamless steel tubes and pipes for ship
GB/T 8162-1999
Replaced
GB/T 8162-1999 Seamless steel tubes for structural purposes
GB/T 8163-1999
Replaced
GB/T 8163-1999 Seamless steel tubes for liquid service
GB 18248-2000
Replaced