GB/T 3507-1983
Replaced
GB/T 5272-2017
Active
National standards
GB/T 5272-2017 Coupling with elastic spider
GB/T 5272-2017 Coupling with elastic spider
Basic Information
Standard Code:
GB/T 5272-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Couplings, brakes, and transmissions
ICS Name:
Couplings, clutches, and friction devices
Publish Date:
2017-05-12
Implement Date:
2017-12-01
Pages:
19 pages
Scope
This standard specifies the types, basic parameters, main dimensions, marking methods, technical requirements, and inspection rules for standard LM-type, LMS-type, LML-type, and LMP-type flower-shaped elastic couplings (hereinafter referred to as couplings). This standard is applicable to drive shaft systems with a working environment temperature of -35°C to +80°C, a nominal torque transmission of 28 N·m to 14,000 N·m, and the ability to compensate for the relative displacement between two shafts and provide vibration-damping and cushioning performance for connecting two coaxial shafts.
Development Information
Replace the following standards
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 529-1999 Rubber,vulcanized or thermoplastic—Determination of tear strength (Trouser,angle and crescent test pieces)
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 699-1999 Quality carbon structural steels
GB/T 699-2015 Quality carbon structure steels
GB/T 1348-1988 Spheroidal graphite iron castings
GB/T 1348-2009 Spheroidal graphite iron castings
GB/T 1348-2019 Spheroidal graphite iron castings
GB/T 1681-1991 Rubber—Determination of rebound resilience of vulcanizates
GB/T 1681-2009 Rubber—Determination of rebound resilience of vulcanizates
GB/T 1682-1994 Rubber, vulcanized—Determination of low-temperature brittleness(single test piece method)
GB/T 1682-2014 Rubber,vulcanized—Determination of low-temperature brittleness—Single test piece method
GB/T 1689-1998 Rubber vulcanized—Determination of abrasion resistance(Akron machine)
GB/T 1689-2014 Rubber vulcanized—Determination of abrasion resistance (Akron machine)
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 3852-1997 Types and dimension for coupling bores and their connection
GB/T 3852-2008 Types and dimensions for coupling bores and their connection
GB/T 3852-2017 Types and dimensions for coupling bores and their connection
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 11352-1989 Carbon steel castings for general engineering purposes
GB/T 11352-2009 Carbon steel castings for general engineering purpose
Related Standards
GB/T 6073-1985
Replaced
GB/T 6073-1985 Type LT highly elastic frictionclutch
GB/T 13807.1-1992
Replaced
GB/T 13807.1-1992 Connections with waisted stud—Tape classification
GB/T 13807.2-1992
Replaced
GB/T 13807.2-1992 Connections with waisted stud—Studs
GB/T 13807.3-1992
Replaced
GB/T 13807.3-1992 Connections with waisted stud—Nuts, extension sleeves
GB/T 15141-1994
Replaced