GB/Z 18427-2001
Active
GB/T 3683-2011
Replaced
National standards
GB/T 3683-2011 Rubber hoses and hose assemblies—Wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification
GB/T 3683-2011 Rubber hoses and hose assemblies—Wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification
Basic Information
Standard Code:
GB/T 3683-2011
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Rubber hoses, adhesive tapes, and rubber cloths
ICS Name:
Pipes and pipe fittings
Publish Date:
2011-05-12
Implement Date:
2011-12-01
Pages:
12 pages
Scope
This standard specifies the requirements for six types of steel wire braided reinforced hoses and hose assemblies with a nominal inner diameter of 5 to 51 mm, including an additional specification of 63 mm for type R2ATS. They are suitable for use with water-based hydraulic fluids defined in GB/T 7631.2 as HFC, HFAE, HFAS, and HFB, within a temperature range of -40°C to +60°C, or with oil-based hydraulic fluids defined in GB/T 7631.2 as HH, HL, HM, HR, and HV, within a temperature range of -40°C to +100°C.
This standard does not include requirements for pipe fittings, but only for the performance of hoses and hose assemblies.
Note: It is the user's responsibility to consult with the hose manufacturer to determine the compatibility of the hose with the fluid being used.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 5564-2006 Rubber and plastics hoses—Subambient temperature flexibility tests
GB/T 14905-2009 Rubber and plastics hoses—Determination of adhesion between components
GB/T 24134-2009 Rubber and plastics hoses—Assessment of ozone resistance under static conditions
ISO 1817
ISO 6605
ISO 8330
GB/T 5563-1994 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2006 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 5567-1994 Rubber and plastics hoses and hose assemblies—Determination of suction resistance
GB/T 5567-2006 Rubber and plastics hoses and hose assemblies—Determination of suction resistance
GB/T 5567-2013 Rubber and plastics hoses and hose assemblies—Determination of resistance to vacuum
GB/T 5568-1994 Rubber or plastics hoses and hose assemblies—Hydraulic impulse test without flexing
GB/T 5568-2006 Rubber or plastics hoses and hose assemblies—Hydraulic impulse test without flexing
GB/T 5568-2013 Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing
GB/T 7631.2-2003 Lubricants,industrial oils and related products(class L)—Classification—Part 2:Family H(Hydraulic systems)
GB/T 9573-2003 Rubber and plastics hose and hose assemblies—Methods of measurement of dimensions
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies—Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
GB/T 9575-2003 Rubber and plastics hoses for general—Purpose industrial applications-Bore diameters and tolerances,and tolerances on length
GB/T 9575-2013 Rubber and plastics hoses—Hose sizes, minimum and maximum inside diameters,and tolerances on cut-to-length hoses
GB/T 5563-2025 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
Adopt standards
ISO 1436:2009
Related Standards
GB/T 7937-2002
Replaced
GB/T 7937-2002 Fluid power systems and components—Connectors and associated components—Nominal pressures
GB/T 15329.1-2003
Replaced
GB/T 15329.1-2003 Rubber hoses and hose assemblies—Textile-reinforced hydraulic types—Specification—Part 1:Oil-based fluid applications
GB/T 5860-2003
Active
GB/T 5860-2003 Hydraulic fluid power—Quick-action couplings Dimensions and requirements
GB/T 5861-2003
Active
GB/T 5861-2003 Hydraulic fluid power—Quick action couplings—Test methods
GB/T 7937-2008
Abolished