GB 19510.10-2004
Replaced
GB/T 24908-2014
Active
National standards
GB/T 24908-2014 Non-directional self-ballasted LED-lamps for general lighting services—Performance requirements
GB/T 24908-2014 Non-directional self-ballasted LED-lamps for general lighting services—Performance requirements
Basic Information
Standard Code:
GB/T 24908-2014
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric light source products
ICS Name:
Other standards related to lighting
Publish Date:
2014-09-03
Implement Date:
2015-08-01
Pages:
12 pages
Scope
This standard specifies the terms and definitions, product classification and naming, technical requirements, test methods, and inspection rules for non-directional self-ballasted LED lamps used for general lighting.
This standard applies to non-directional self-ballasted LED lamps that integrate stable ignition components and are used for general lighting in homes and similar settings.
The scope of application is as follows:
——Rated power not exceeding 60 W;
——Rated voltage AC 220 V, frequency 50 Hz;
——Using a screw-type lamp holder that complies with GB/T 1406.1 or a bayonet-type lamp holder that complies with GB/T 1406.5.
Development Information
Replace the following standards
Referenced Standards
GB/T 1406.1-2008 Types and dimensions of lamp caps—Part 1:Screw caps
GB/T 1406.5-2008 Types and dimensions of lamp caps—Part 5:Bayonet caps
GB/T 1483.1-2008 Gauges for lamp caps and holders—Part 1:Gauges for screw caps and holders
GB/T 1483.5-2003 Gauges for lamp caps and holders—Part 5:Gauges for bayonet caps
GB/T 1483.5-2008 Gauges for caps and lampholders—Part 5:Gauges for bayonet caps and lampholders
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 7249-2002 Maximum lamp outlines for incandescent lamps
GB/T 7249-2008 Maximum lamp outlines for incandescent lamps
GB/T 7249-2016 Maximum lamp outlines for incandescent lamps
GB/T 10681-2004 Tungsten filament lamps for domestic and similar general lighting purposes—Performance requirements
GB/T 10681-2009 Tungsten filament lamps for domestic and similar general lighting purposes—Performance requirements
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB 17625.1-2012 Electromagnetic compatibility—Limits—Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17625.1-2022 Electromagnetic compatibility—Limits—Part 1:Limits for harmonic current emissions(equipment input current ≤16 A per phase)
GB 17743-1999 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2007 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2017 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 17743-2021 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
GB/T 18595-2001 Equipment for general lighting purposes—EMC immunity requirements
GB/T 18595-2014 Equipment for general lighting purposes—EMC immunity requirements
GB/T 20145-2006 Photobiological safety of lamps and lamp systems
GB/T 24824-2009 Measurement methods of LED modules for general lighting
GB/T 24826-2009 Terms and definitions of LEDs and LED modules for general lighting
GB/T 24826-2016 General lighting-Light emitting diode(LED) products and related equipment—Terms and definitions
GB 24906-2010 Self-ballasted LED lamps for general lighting services＞50 V—Safety specifications
GB/T 24906-2023 Self-ballasted LED-lamps for general lighting services by voltage>50 V—Safety specifications
GB/T 31112-2014 Classification of non-directional self-ballasted LED-lamps for general lighting services
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Adopt standards
IEC 62612:2009
Related Standards
GB 19510.11-2004
Replaced
GB 19510.11-2004 Lamp controlgear—Part 11:Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes)
GB 19510.1-2004
Replaced
GB 19510.1-2004 Lamp control gear—Part 1:General and safety requirements
GB 19510.3-2004
Replaced
GB 19510.3-2004 Lamp controlgear—Part 3:Particular requirements for d.c.or a.c.supplied electronic step-down convertors for filament lamps
GB 19510.9-2004
Replaced
GB 19510.9-2004 Lamp control gear—Part 9:Particular requirements for ballasts for fluorescent lamps
GB 19510.12-2005
Replaced