GB 1971-1980
Replaced
GB/T 21209-2017
Replaced
National standards
GB/T 21209-2017 AC electrical machines used in power drive systems—Application guide
GB/T 21209-2017 AC electrical machines used in power drive systems—Application guide
Basic Information
Standard Code:
GB/T 21209-2017
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Rotating motor
ICS Name:
Rotating motor
Publish Date:
2017-11-01
Implement Date:
2018-05-01
Pages:
76 pages
Scope
This standard describes the performance characteristics of AC motors powered by frequency converters and clarifies the design features of frequency-dedicated motors. The standard also specifies the interface parameters and interactions between motors and frequency converters as part of power drive systems, including installation guidelines, but excludes the voltage at the power supply interface, which is described in IEC TS 618008. The general requirements of other relevant parts of the IEC 60034 series standards also apply to motors within the scope of this standard. For motors operating in potentially explosive gas environments, the IEC 60079 series or IEC 61241 series have additional requirements for dust explosion prevention. Safety is not the main focus of this standard, but some of its recommendations involve safety issues that must be considered. If the frequency converter manufacturer provides specific installation recommendations, it is advisable to prioritize their recommendations before referring to this standard.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 10068-2008 Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement,evaluation and limits of vibration severity
GB/T 10069.3-2008 Measurement of airborne noise emitted by rotating electrical machines and the noise limits—Part 3:Noise limits
GB/T 12668.2-2002 Adjustable speed electrical power drive systems—Part 2:General requirements—Rating specifications for low voltage adjustable frequency a.c power drive systems
IEC 60034-1:2010
IEC 60034-2-1
IEC 60034-2-2
IEC 60034-2-3
IEC 60034-6
IEC 60034-12
IEC 60034-18-41:2014
IEC TS 60034-18-42
IEC 60050(所有部分)
IEC TR 61000-5-1
IEC TR 61000-5-2
IEC 61800-3
IEC 61800-5-1
IEC TS 61800-8:2010
IEC TS 62578:2009
Adopt standards
IEC TS 60034-25:2014
Related Standards
GB/T 4831-1984
Replaced
GB/T 4831-1984 Specification for model of rotating electrical machi nes
GB/T 5321-1985
Replaced
GB/T 5321-1985 Measurement of loss and efficiency for large AC electrical machines by the calorimetric method
GB/T 12351-1990
Replaced
GB/T 12351-1990 Enviromental technical requirements of rotating electric machines for tropical use
GB/T 756-1990
Replaced
GB/T 756-1990 Cylindrical shaft extension for rotating electrical machines
GB/T 13394-1992
Abolished