T/CECS 10105-2020
Active
Group standards
T/CECS 10105-2020 Commercial full pre-mix condensing hot water stove
T/CECS 10105-2020 Commercial full pre-mix condensing hot water stove
Price:
$ 51.00
Basic Information
Standard Code:
T/CECS 10105-2020
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating and heating engineering
ICS Name:
\nWater heating equipment
Publish Date:
2020-08-25
Implement Date:
2021-01-01
Pages:
44 pages
Scope
This document specifies the classification and models, materials, structures, and safety requirements, performance requirements, test methods, inspection rules, markings, warnings, and manuals, as well as packaging, transportation, and storage for commercial gas fully premixed condensing hot water boilers (hereinafter referred to as condensing boilers).
This document applies to condensing boilers with a rated heat input of greater than or equal to 100 kW and less than or equal to 2,800 kW, a maximum outlet water temperature of no more than 95 °C, and an outlet water pressure of less than 0.1 MPa during operation.
The gas referred to in this document is artificial gas, natural gas, and liquefied petroleum gas as specified in GB/T 13611.
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 2828.2-2008 Sampling procedures for inspection by attributes—Part 2:Sampling plans indexed by limiting quality(LQ)for isolated lot inspection
GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB 4706.1-2005 Household and similar electrical appliances—Safety—Part 1:General requirements
GB 5013.1-1997 Rubber insulated cables of rated voltages up to and including 450/750V—Part 1:General requirements
GB/T 5013.1-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements
GB 5023.1-1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V—Part 1:General requirements
GB/T 5023.1-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 1:General requirements
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9112-2000 Types and parameters for steel pipe flanges
GB/T 9112-2010 Types and parameters for steel pipe flanges
GB/T 13611-1992 Classification of town gas
GB/T 13611-2006 Classification and essential property of city gas
GB/T 13611-2018 Classification and basic characteristics of city gas
GB 14536.1-1998 Automatic electrical controls for household and similar use Part 1:General requirements
GB/T 14536.1-2008 Automatic electrical controls for household and similar use—Part 1:General requirements
GB/T 14536.1-2022 Automatic electrical controls—Part 1:General requirements
GB/T 16411-1996 Universal test methods of gas burning appliances for domestic use
GB/T 16411-2008 Universal test methods of gas burning appliances for domestic use
GB/T 16411-2023 Universal test methods of gas burning appliances for domestic use
GB 25034-2010 Gas-fired heating and hot water combi-boilers
GB 25034-2020 Gas-fired heating and hot water combi-boiler
GB/T 37499-2019 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Automatic and semi-automatic valves
GB/T 37992-2019 Safety and control devices for gas burners and gas-burning-appliances—Particular requirements—Value-proving systems for automatic shut-off valves
CJ/T 199-2004 Stainless steel supphy-exhaust pipe for burning equipment
CJ/T 199-2018 Supply-exhaust pipe for combustion appliance
CJ/T 395-2012 Gas-fired heating and hot water condensing combi-boilers
CJ/T 398-2012 Electronic gas/air ratio adjustment devices for household gas appliances
CJ/T 421-2013 Electronic controller of household gas burning appliances
CJ/T 450-2014 Pneumatic gas/air ratio adjustment devices for gas-burning appliances
HG/T 20592
JB/T 81-2015 Sheet steel plate welding flanged steel pipe flange
JB 81-1994 Convex Panel-Type Flat-Weld Steel Pipe Flanges
T/CECS 10007-2018 Gas-fired heating and water heater burners
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB 14536.8-1996
Replaced
GB 4706.75-2004
Replaced
GB 4706.75-2004 Safety of household and similar electrical appliances—Particular requirements for fixed immersion heaters
GB 4706.75-2008
Replaced
GB 4706.75-2008 Household and similar electrical appliances—Safety—Particular requirements for fixed immersion heaters
JG/T 379-2012
Active
JG/T 379-2012 Technical requirements of the heat allocation device by heating time and heating area
DB34/T 5006-2023
Active
DB34/T 5006-2023 Solar photovoltaic and building integration technology specification
DB13/T 5568-2022
Active