GB/T 7373-2006
Active
National standards
GB/T 7373-2006 Monochlorodifluoro methane for industrial uses
GB/T 7373-2006 Monochlorodifluoro methane for industrial uses
Basic Information
Standard Code:
GB/T 7373-2006
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Generally, organic chemical raw materials
ICS Name:
Organic chemistry
Publish Date:
2006-09-01
Implement Date:
2007-02-01
Pages:
12 pages
Scope
This standard specifies the requirements, test methods, inspection rules, and packaging, marking, transportation, and storage for methylene chloride difluoride used in industry. This standard applies to methylene chloride difluoride produced by the liquid-phase catalytic method from methylene chloride and hydrogen fluoride. Type I of this product is mainly used as a refrigerant or a raw material for other fluorochemical products except tetrafluoroethylene, while Type II is used for the synthesis of tetrafluoroethylene. Molecular formula: CHClF2 Molecular weight: 86.47 (based on the 2001 International Atomic Weight Table)
Development Information
Replace the following standards
Referenced Standards
GB/T 6681-2003 General rules for sampling gaseous chemical products
GB 13690-1992 Classification and labels of dangerous chemical substances commonly used
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 601-2002 Chemical reagent Preparations of standard volumetric solutions
GB/T 601-2016 Chemical reagent—Preparations of reference titration solutions
GB/T 603-2002 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 603-2023 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 1250-1989 Rules for expression and judgement of limiting values
GB/T 5831-1986 Determination of trace oxygen in the gases—Colorimetric method
GB/T 5831-2011 Determination of trace oxygen in the gases—Colorimetric method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 7375-1987 Fluorinated methanes for industrial uses—Determination of purity—Gas chromatography
GB/T 7375-2006 Fluorinated methanes for industrial use—Determination of purity—Gas chromatography
GB/T 7376-1987 Fluorinated methanes for industrial uses—Determination of micro-amounts of water—Karl fischer method
GB/T 7376-2008 Determination of micro-amounts of water in industrial fluorinated alkane
GB/T 9722-2006 Chemical reagent—General rules for the gas chromatography
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10670-1989 Fluorinated methanes for industrial uses—Determination of micro-amounts of water—Electrolytic method
GB 14193-1993 Rules for filling of liquefied gas cylinders
GB/T 14193-2009 Rules for filling of liquefied gas cylinders
GB/T 14193.1-2025 Rules for the filling of liquefied gas cylinders—Part1:Industrial gas cylinder
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 9722-2023 Chemical reagent—General rules for the gas chromatography
Related Standards
GB/T 2288-1980
Replaced
GB/T 5192-1985
abolished_transferred
GB/T 5192-1985 Technical requirements of synthetic scheelite
GB/T 6324.1-1986
Replaced
GB/T 6324.1-1986 Organic chemical products for industrial use—Standard test method for water miscibility
GB/T 6324.2-1986
Replaced
GB/T 6324.2-1986 Volatile organic liquids—Determination of dry residue after evaporation on a water bath—General method
GB/T 6324.4-1986
Replaced
GB/T 6324.4-1986 Determination of trace sulphur in products of organic liquid—Micro-coulometry method
GB/T 6324.5-1986
Replaced