GB/T 1525-1979
Replaced
GB/T 1914-2017
Active
National standards
GB/T 1914-2017 Chemical analytical filter paper
GB/T 1914-2017 Chemical analytical filter paper
Basic Information
Standard Code:
GB/T 1914-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paper
ICS Name:
Paper and cardboard
Publish Date:
2017-12-29
Implement Date:
2018-07-01
Pages:
11 pages
Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for qualitative and quantitative filter paper used in chemical analysis. This standard applies to filter paper used in qualitative and quantitative analysis.
Development Information
Replace the following standards
Referenced Standards
GB/T 1545.2-2003 Paper, board and pulp-Determination of pH of aqueous extracts
GB/T 450-2002 Paper and board—Sampling for testing
GB/T 450-2008 Paper and board—Sampling for testing and identification of machine and cross direction,wire side and felt side
GB/T 451.1-2002 Paper and board—Determination of size and deviation
GB/T 451.2-2002 Paper and board—Determination of grammage
GB/T 451.2-2023 Paper and board—Part 2:Determination of grammage
GB/T 454-2002 Paper—Determination of bursting strength
GB/T 454-2020 Paper—Determination of bursting strength
GB/T 462-2003 Paper and board—Determination of moisture content
GB/T 462-2008 Paper,board and pulp—Determination of moisture content of analytical sample
GB/T 462-2023 Paper, board and pulps—Determination of moisture content of analytical sample
GB/T 742-2003 Paper,board and pulp—Determination of residue(ash) on ignition at 900℃
GB/T 742-2008 Fibrous raw material,pulp,paper and board—Determination of ash
GB/T 742-2018 Fibrous raw material,pulp,paper and board—Determination of residue(ash)on ignition at 575 ℃ and 900 ℃
GB/T 744-2004 Pulps-Determination of alkali resistance
GB/T 1541-2007 Paper and board—Determination of dirt
GB/T 1541-2013 Paper and board—Determination of dirt
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 7974-2002 Paper, board and pulp-Measurement of brightness—Diff/Geometry
GB/T 7974-2013 Paper,board and pulps—Measurement of diffuse blue reflectance factor—D65 brightness(Diff/ Geometry,Outdoor daylight conditions)
GB/T 10340-2008 Paper and board—Determination of filtering rate
GB/T 10739-2002 Paper, board and pulps—Standard atmosphere for conditioning and testing
GB/T 10739-2023 Paper,board and pulps—Standard atmosphere for conditioning and testing
GB/T 12914-1991 Paper and board—Determination of tensile properties—Constant rate of elongation method
GB/T 12914-2008 Paper and board—Determination of tensile properties
GB/T 12914-2018 Paper and board—Determination of tensile properties—Constant rate of elongation method(20 mm/min)
Related Standards
GB/T 2675-1981
Replaced
GB/T 2675-1981 Paper for drawing land maps
GB/T 2676-1981
Replaced
GB/T 2676-1981 Paper for drawing ocean maps
GB/T 4687-1984
Replaced
GB/T 4687-1984 Paper, board, pulp terms (Ⅰ)
GB/T 4873-1985
Active
GB/T 4873-1985 Continuous forms used for information processing—Sizes and feed holes
GB/T 5034-1985
Replaced