GB/T 2596-1981
Abolished
YS/T 617.5-2007
Active
Industry standards-Non-ferrous metals
YS/T 617.5-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 5:Determination of grease content of aluminum powder
YS/T 617.5-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 5:Determination of grease content of aluminum powder
Basic Information
Standard Code:
YS/T 617.5-2007
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nTest methods for the physical properties of metals
ICS Name:
Chemical analysis of metal materials
Publish Date:
2007-04-13
Implement Date:
2007-10-01
Pages:
7 pages
Scope
This method specifies the determination method for the content of grease (stearic acid) in aluminum powder. This method is suitable for determining the content of stearic acid in aluminum powder milled by dry method. The determination range (mass fraction): 0.10% to 4.0%. This method is not suitable for analyzing aluminum powder milled by wet method, otherwise there is a possibility of fire or even explosion.
Development Information
Same series standard
YS/T 617.1-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 1:Determination of active Al,Mg or Al-Mg content—Gasometric method
YS/T 617.2-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 2:Determination of aluminum content of Al-Mg alloy powders—Fluoride replacement-complexometric method
YS/T 617.3-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 3:Determination of volatile matter(water)content—Drying-degravimetric method
YS/T 617.4-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 4:Determination of insoluble content in hydrochloric acid of magnesium powder—Gravimetric method
YS/T 617.6-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 6:Determination of particle size distribution—Sieve method
YS/T 617.7-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 7:Determination of particle size distribution—Laser scatterance/diffraction method
YS/T 617.8-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 8:Determination of apparent density
YS/T 617.9-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 9:Determination of adhesion ratio of aluminum powder
YS/T 617.10-2007 Determination of chemical compositions and physical properties of aluminum powder,magnesium powder and Al-Mg alloy powder—Part 10:Determination of coating surface of aluminum powder
Related Standards
GB/T 3249-1982
Replaced
GB/T 3249-1982 Standard method for determination of particle size of powders of refractory metals and compounds—Fisher method
GB/T 3488-1983
Replaced
GB/T 3488-1983 Hardmetals—metallographic determination of microstructure
GB/T 3489-1983
Replaced
GB/T 3489-1983 Hardmetals—Metallographic determination of porosity and uncombined carbon
GB/T 3651-1983
Replaced
GB/T 3651-1983 Measuring method for thermal conductivity of metal at high temperature
GB/T 4059-1983
Replaced