GB/T 5655-1985
Abolished
GA 666-2018
Active
Industry standards-Public safety
GA 666-2018 Retro-reflective sheetings for license plates of motor vehicles
GA 666-2018 Retro-reflective sheetings for license plates of motor vehicles
Basic Information
Standard Code:
GA 666-2018
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Waterway transportation
ICS Name:
Road transport
Publish Date:
2018-05-02
Implement Date:
2018-06-01
Pages:
20 pages
Scope
This standard specifies the technical requirements, test methods, and inspection rules for reflective films used on motor vehicle license plates.
This standard applies to reflective films used on motor vehicle license plates.
Development Information
Replace the following standards
Referenced Standards
公交管[2017]485号
GB 251-1995 Gray scale for assessing staining
GB/T 251-2008 Textiles—Tests for colour fastness—Grey scale for assessing staining
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3681-2000 Plastics—Test method of exposure to weathering
GB/T 3681-2011 Plastics—Methods of exposure to direct weathering,to weathering using glass-filtered daylight,and to intensified weathering by daylight using Fresnel mirrors
GB/T 3681.1-2021 Plastics—Methods of exposure to solar radiation—Part 1:General guidance
GB/T 3681.2-2021 Plastics—Methods of exposure to solar radiation—Part 2:Direct weathering and exposure behind window glass
GB/T 3880.3-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3880.3-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 3:Tolerances on forms and dimensions
GB/T 3978-1994 Standard illuminants and illuminating—viewing conditions
GB/T 3978-2008 Standard illuminants and geometric conditions
GB/T 3979-1997 Methods of measuring the color of materials
GB/T 3979-2008 Methods for the measurement of object color
GB/T 7706-2008 The relief prints for decorating
GB/T 16422.2-1999 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon—arc sources
GB/T 16422.2-2014 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon-arc sources
GB/T 16422.2-2022 Plastics—Methods of exposure to laboratory light sources—Part 2:Xenon-arc lamps
GB/T 18833-2002 Retro-reflective sheeting for road traffic signs
GB/T 18833-2012 Retroreflective sheeting for traffic control
JT/T 687-2007 Measurer for liner removal performance of retroreflective sheeting
Related Standards
GB/T 5845.10-1986
Replaced
GB/T 5845.10-1986 Marks for urban public transport—Marks for prohibition and general
GB/T 5845.11-1986
Replaced
GB/T 5845.11-1986 Marks for urban public transport—Stop board of bus and trolleybus and tramcar
GB/T 5845.1-1986
Replaced
GB/T 5845.1-1986 Marks for urban public transport—General mark for public transport
GB/T 5845.12-1986
Abolished
GB/T 5845.12-1986 Marks for urban public transport—Stop board for light rail rapid transit
GB/T 5845.2-1986
Replaced