GB/T 17486-1998
Replaced
GB/T 13871.6-2022
Active
National standards
GB/T 13871.6-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 6:Specification of elastomeric materials
GB/T 13871.6-2022 Rotary shaft lip-type seals incorporating elastomeric sealing elements—Part 6:Specification of elastomeric materials
Price:
$ 50
Basic Information
Standard Code:
GB/T 13871.6-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Hydraulic and pneumatic devices
ICS Name:
Filter, sealing gasket, and fluid impurities
Publish Date:
2022-10-12
Implement Date:
2022-10-12
Pages:
9 pages
Scope
This document specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage for rotary shaft lip sealing rings made of elastomeric materials, where the sealing elements are made of elastomeric materials. This document applies to rotary shaft lip sealing rings (hereinafter referred to as "sealing rings") used under low-pressure conditions.
Development Information
Same series standard
Referenced Standards
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 2941-2006 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 5576-1997 Rubbers and latices—Nomenclature
GB/T 6031-1998 Rubber,vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 6031-2017 Rubber,vulcanized or thermoplastic—Determination of hardness(hardness between 10 IRHD and 100 IRHD)
GB/T 7758-2002 Rubber,vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure(TR test)
GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test)
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 2941-2025 Rubber—General procedures for preparing and conditioning test pieces for physical test methods
GB/T 5576-2025 Rubber and latices—Nomenclature
Related Standards
GB/T 14039-2002
Active
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles
GB/T 18853-2002
Replaced
GB/T 18853-2002 Hydraulic fluid power filters—Multi-pass method for evaluating filtration performance of a filter element
GB/T 18854-2002
Replaced
GB/T 18854-2002 Hydraulic fluid power—Calibration of liquid automatic particle counters
GB/T 3452.1-2005
Active
GB/T 3452.1-2005 Fluid power systems—O-rings—Part 1:Inside diameters, cross-sections, tolerances and size identification code
GB/T 20082-2006
Active