GB/T 16731-1997
Replaced
T/CADBM 46-2021
Active
Group standards
T/CADBM 46-2021 Furring and accessory of ceiling
T/CADBM 46-2021 Furring and accessory of ceiling
Price:
$ 31.00
Basic Information
Standard Code:
T/CADBM 46-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
\nMetal fittings and accessories
ICS Name:
Building components
Publish Date:
2021-07-30
Implement Date:
2021-10-30
Pages:
20 pages
Scope
This document specifies the classification and marking of ceiling keel and accessories, their requirements, and describes the corresponding test methods. It also stipulates the technical content of inspection rules, marking, packaging, transportation, and storage, etc.
This document is applicable to the design, development, production, and testing of metal keel and accessories used in indoor ceilings of public buildings and residential buildings.
Development Information
Referenced Standards
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 2518-2004 Continuous hot-dip zinc-coated steel sheets and strips
GB/T 2518-2008 Continuously hot-dip zinc-coated steel sheet and strip
GB/T 2518-2019 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip
GB/T 3880.1-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery
GB/T 3880.1-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery
GB/T 3880.1-2023 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 1:Technical conditions of delivery
GB 5237.1-2004 Wrought aluminium alloy extruded profiles for architecture—Part 1:Untreated profiles
GB/T 5237.1-2008 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB/T 5237.1-2017 Aluminium alloy extruded profiles for architecture—Part 1:Mill finish profiles
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 11981-2008 Steel furring for building
GB/T 12754-1991 Coloured paint coat steel plates and strips
GB/T 12754-2006 Prepainted steel sheet
GB/T 12754-2019 Prepainted steel sheet and strip
JC/T 558-2007 Light steel framing accessories for construction
JC/T 558-1994 Light steel architectural frame accessories
JC/T 2220-2014 Aluminum alloy T-type roof beam
YB/T 5058
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
Related Standards
GB/T 11981-2001
Replaced
GB/T 11981-2001 Steel furrings for buildings
JG 138-2001
Replaced
JG 138-2001 The support device of point supported glass curtain wall
JG/T 139-2001
Replaced
JG/T 139-2001 The support device of suspended glass curtain wall
GB/T 11981-2008
Replaced
GB/T 11981-2008 Steel furring for building
GB/T 23443-2009
Replaced