GB/T 11372-1989
Replaced
GB/T 19436.2-2025
Active
National standards
GB/T 19436.2-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 2:Particular requirements for equipment using active opto-electronic protective devices(AOPDs)
GB/T 19436.2-2025 Electrical safety of machinery—Electro-sensitive protective equipment—Part 2:Particular requirements for equipment using active opto-electronic protective devices(AOPDs)
Price:
$ 131
Basic Information
Standard Code:
GB/T 19436.2-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Health, safety, and labor protection
ICS Name:
Integration of mechanical systems and standard parts
Publish Date:
2025-10-31
Implement Date:
2026-05-01
Pages:
48 pages
Scope
This document specifies the requirements for the design, manufacture, and testing of electro-sensitive protective equipment (ESPE), which is a component of safety-related systems, using active optoelectronic protective devices (AOPDs) to detect human presence. It is particularly important to ensure that the ESPE meets appropriate safety-related performance requirements based on its characteristics. ESPE may include selective safety functions, and the requirements for such functions are provided in GB/T 19436.1–2025 and Appendix A of this document. This document does not specify the size or shape of the detection zone, the arrangement of hazardous components in any specific application, or the conditions that constitute a mechanical hazardous state. It is limited to the functionality of ESPE and how it interfaces with mechanical systems. This document does not include the use of AOPDs with radiation wavelengths outside the range of 400 nm to 1,500 nm. This document may be relevant to applications other than human protection, such as protecting machinery or products from mechanical damage. In these applications, additional requirements may be necessary, such as materials that must be recognized by the sensitive function and possess characteristics different from those of humans. This document does not address the emission requirements of electromagnetic compatibility (EMC).
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GB/T 17799.7-2022 Electromagnetic compatibility—Generic standards—Part 7:Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
GB/T 16855.2-2015 Safety of machinery—Safety-related parts of control systems—Part 2:Validation
ISO 13849-1
ISO 12100
IEC 60068-2-6
IEC 60068-2-27
IEC 60068-2-64
IEC 60417
IEC 60447
IEC 60445
IEC 60529
IEC 60721-3-5
IEC TR 60721-4-3
IEC 60947-1:2007
IEC 60947-1:2007/AMD2:2014
IEC 61000-4-3:2006
IEC 61000-4-3:2006/AMD1:2007
IEC 61000-4-3:2006/AMD2:2010
IEC 61000-4-5:2014/AMD1:2017
IEC 615808-2
IEC 61508(所有部分)
IEC 62061
ISO 13855
ISO 20471
IEC 60825-1
IEC 62046
IEC 62471
Adopt standards
IEC 61496-2:2020
Related Standards
GB/T 13309-1991
Replaced
GB/T 13309-1991 Specification for mechanical vibration generator system
GB/T 13310-1991
Replaced
GB/T 13310-1991 Specification for electrodynamic vibration generator system
GB/T 13306-1991
Replaced
GB/T 13306-1991 Plates
GB/T 15755-1995
Active
GB/T 15755-1995 The calculation and selection of cone interference fits
GB/T 10943-2003
abolished_transferred